Improved
Fixed
Software Update 6.3.7
New Improvements:
- We've updated the look of the 'Update/Don't Update' default buttons. These changes make the buttons more distinguishable, enhancing the user interface and ensuring that you can make the right selection quickly and confidently.
New Fixes:
- Fixed the layout of the Customer Login/Reset Password page to ensure it remains responsive when resized in the browser.
- We've updated the look of the 'Update/Don't Update' default buttons. These changes make the buttons more distinguishable, enhancing the user interface and ensuring that you can make the right selection quickly and confidently.
New Fixes:
- Fixed the layout of the Customer Login/Reset Password page to ensure it remains responsive when resized in the browser.
- Resolved a bug which was preventing products from being renamed by manufacturers under Tools > Settings > Products.
- Fixed an edge case glitch in Edge Finish restrictions where occasionally a Door's edges would be reset to not edged when specific edge restrictions had been applied.
- Fixed an edge case glitch in Edge Finish restrictions where occasionally a Door's edges would be reset to not edged when specific edge restrictions had been applied.
Improved
Fixed
Software Update 6.3.5
New Improvements:
- We’ve finalised the remainder of the Rangehood products templates for the 3D Product Visualiser
- We’ve finalised the remainder of the Rangehood products templates for the 3D Product Visualiser
- Upper Rangehood Full Vented Left Door
- Users can now press the tab key on the Doors & Panels module to quickly jump between fields, ensuring more seamless operation.
New Fixes:
- Door/Drawer border widths are now more rigorously validated at the room level upon mass updates.
- The date added time stamp time has been corrected to reflect the relevant time zone rather than UTC time.
- The Appliance Roll Up Door 3D Product Visualiser template has been updated to more truly reflect the impact of changes to door margins on the fascia panel.
- Further improvements to site performance and stability.
- Resolved a timeout error when updating exterior and interior materials in a room containing lots of products.
- Door/Drawer border widths are now more rigorously validated at the room level upon mass updates.
- The date added time stamp time has been corrected to reflect the relevant time zone rather than UTC time.
- The Appliance Roll Up Door 3D Product Visualiser template has been updated to more truly reflect the impact of changes to door margins on the fascia panel.
- Further improvements to site performance and stability.
- Resolved a timeout error when updating exterior and interior materials in a room containing lots of products.
New
Improved
Fixed
Software Update 6.3.4
New Improvements:
- In our quest to enhance user experience, we’ve improved the performance when opening and saving products on larger jobs.
- To provide you with better clarity on customers, we've added the 'Business Name' column to both the User Quoting Report and Job Turnover Report.
- Doors & Panels screen has been enhanced to display an indicator showing that mid rails are measured from the bottom of the door to the middle of the rail. This update, along with a more info button on the rail labels, provides clearer and more precise information to customers.
- We've improved the handling of shelf positions in CSV export. Now, the positions are sorted from lowest to highest, accommodating a mix of whole numbers and decimals. This enhancement ensures a more accurate and intuitive import process.
New Fixes:
- Fixed a tiny visual glitch where the secondary colour was being displayed at the edge of the rounded corners on table headers.
- Added the year to the Date Added and Last Logged On time stamps to the Customer list.
- The display of Clearances for Robe Drawer units on the Job Details PDF has been fixed to ensure accurate and clear presentation.
- In our quest to enhance user experience, we’ve improved the performance when opening and saving products on larger jobs.
- To provide you with better clarity on customers, we've added the 'Business Name' column to both the User Quoting Report and Job Turnover Report.
- Doors & Panels screen has been enhanced to display an indicator showing that mid rails are measured from the bottom of the door to the middle of the rail. This update, along with a more info button on the rail labels, provides clearer and more precise information to customers.
- We've improved the handling of shelf positions in CSV export. Now, the positions are sorted from lowest to highest, accommodating a mix of whole numbers and decimals. This enhancement ensures a more accurate and intuitive import process.
New Fixes:
- Fixed a tiny visual glitch where the secondary colour was being displayed at the edge of the rounded corners on table headers.
- Added the year to the Date Added and Last Logged On time stamps to the Customer list.
- The display of Clearances for Robe Drawer units on the Job Details PDF has been fixed to ensure accurate and clear presentation.
New
Improved
Fixed
Software Update 6.3.3
New Features:
- We’ve added a new option for the Manufacturers to enable or disable the ability for Customers to order Notches/Clips on Benchtops. This gives Manufacturers more control over the customisation options available to their Customers. This option is available under Tools > Settings > Preferences
- We’ve added a new option for the Manufacturers to enable or disable the ability for Customers to order Notches/Clips on Benchtops. This gives Manufacturers more control over the customisation options available to their Customers. This option is available under Tools > Settings > Preferences
New Improvements:
- We’ve added more product templates to the 3D Product Visualiser - with now over 75% library coverage
- Pantry L-Shaped Products
- Appliance Products
- The Customer UI has been updated to a newer version, significantly reducing console errors. This update ensures a smoother and more reliable user experience.
New Fixes:
- Fixed an issue with Pending Payment status job using the View Job Details button in email. This fix ensures the integrity of the job status and prevents any unintended modifications.
New Fixes:
- Fixed an issue with Pending Payment status job using the View Job Details button in email. This fix ensures the integrity of the job status and prevents any unintended modifications.
New
Fixed
Software Update 6.3.1
New Features:
- We’ve added a new functionality to the Manufacturer portal's pricing pages, allowing you to download a CSV file of the page's data, make changes externally (e.g. in Excel), then upload the entire file to update all pricing at one time. This enhancement aims to streamline your data management and make updates more efficient. We've also added prompts to download backup data before the price upload, so you can always quickly revert back if need be.
Check out the video here 👉 https://www.youtube.com/watch?v=DcAQ7ptcIrg
New Fixes:
- We've resolved a visual glitch where the Drawer product (from Doors & Panels section) was incorrectly displayed in the Assembly tab despite not having an 'assembled' option.
- Resolved an issue where the cart icon and right sidebar would disappear when reopening the application in a new tab.
- Corrected the Door preview to ensure the hang indication displays correctly, even when the Door Type field is hidden.
- Pushed an update to resolve occasional errors showing on rangehood/microwave/oven products on specific iPad models
- Updated the workflow of jobs in 'Pending Confirmation' so that they are routed back to Pending Approval if the customer makes changes to the products in the order.
- Resolved a panel preview glitch which dropped the door hang and hinge hole indicators if the door style was forced to single door only.
- Updated the handling of google addresses which include an 'address name', to appropriately use commas in the formatting of the addresses.
- We’ve added a new functionality to the Manufacturer portal's pricing pages, allowing you to download a CSV file of the page's data, make changes externally (e.g. in Excel), then upload the entire file to update all pricing at one time. This enhancement aims to streamline your data management and make updates more efficient. We've also added prompts to download backup data before the price upload, so you can always quickly revert back if need be.
Check out the video here 👉 https://www.youtube.com/watch?v=DcAQ7ptcIrg
New Fixes:
- We've resolved a visual glitch where the Drawer product (from Doors & Panels section) was incorrectly displayed in the Assembly tab despite not having an 'assembled' option.
- Resolved an issue where the cart icon and right sidebar would disappear when reopening the application in a new tab.
- Corrected the Door preview to ensure the hang indication displays correctly, even when the Door Type field is hidden.
- Pushed an update to resolve occasional errors showing on rangehood/microwave/oven products on specific iPad models
- Updated the workflow of jobs in 'Pending Confirmation' so that they are routed back to Pending Approval if the customer makes changes to the products in the order.
- Resolved a panel preview glitch which dropped the door hang and hinge hole indicators if the door style was forced to single door only.
- Updated the handling of google addresses which include an 'address name', to appropriately use commas in the formatting of the addresses.
New
Fixed
Software Update 6.3.0
New Features:
- We’ve added a new integration for cloud-based benchtop data processing. This new feature allows manufacturers to manage benchtop manufacturing parameters within Cabinetry.Online to auto generate machining tokens ready for post processing. This feature will be available for benchtop-only jobs.
- We’ve added a new integration for cloud-based benchtop data processing. This new feature allows manufacturers to manage benchtop manufacturing parameters within Cabinetry.Online to auto generate machining tokens ready for post processing. This feature will be available for benchtop-only jobs.
New fixes:
- We've resolved a couple of small 3D Product Visualiser bugs items, including product template adjustments to ensure more precise alignment of bottom and side panels and better representation of edge/unedged sides on panels of cabinets.
- Made an adjustment to the validation of U and L shape benchtops where butt joins are in use, to ensure correct handling of adhering to a material’s maximum capacity
New
Improved
Fixed
Software Update 6.2.0
New Features:
- We’ve added a new Butt Join capability to the benchtop specifier. This new feature includes:
- We’ve added a new Butt Join capability to the benchtop specifier. This new feature includes:
- New setting on materials to toggle on the materials ability to have a butt join used on it, along with maximum butt joins that can be applied
- A new butt join cost variable under the Joins settings.
- A minimum distance from edge setting, which allows you to define how close to the end of a benchtop a butt join can be applied
- Customer UI changes to allow the customer to set sizes of individual benchtop pieces and/or locations of butt joins.
New Improvements:
- We’ve added more product templates to the 3D Product Visualiser
- Wall Oven cabinets
- Open Upper Clip & Radius cabinets
New Fixes:
- The PDF options displayed are now consistent when “Load More Jobs” on the manufacturer dashboard is clicked.
- Fixed an issue where the "/" shortcut key to open search was firing off the popup when typing in additional email content on the accept job screens.
Improved
Fixed
Software Update 6.1.1
New Improvements:
- We’ve made a handy update to the Customer UI: products on the Add Product page are now sorted alphabetically, making it that much easier for customers to find what they're looking for.
- We’ve enhanced the Manufacturer dashboard by adding 'Unsubmit' and 'Accept' options in the Customer Approved section. This update also extends to the Job reports page, giving you more control over your workflow.
- We've removed the double up of text from email templates which listed 'New Shipping Cost'. This has been removed for clarity, so that there is only one source of shipping costs displayed in the job information table within the content of the email.
New Fixes:
- Resolved a glitch where Favicons weren't displaying correctly.
- Corrected a display issue where drawer runners options showed the first option in the list on editing a product.
Other:
- As part of our plans to overhaul reporting capabilities, the Job Cost report has been retired and is no longer accessible.
- We’ve made a handy update to the Customer UI: products on the Add Product page are now sorted alphabetically, making it that much easier for customers to find what they're looking for.
- We’ve enhanced the Manufacturer dashboard by adding 'Unsubmit' and 'Accept' options in the Customer Approved section. This update also extends to the Job reports page, giving you more control over your workflow.
- We've removed the double up of text from email templates which listed 'New Shipping Cost'. This has been removed for clarity, so that there is only one source of shipping costs displayed in the job information table within the content of the email.
New Fixes:
- Resolved a glitch where Favicons weren't displaying correctly.
- Corrected a display issue where drawer runners options showed the first option in the list on editing a product.
Other:
- As part of our plans to overhaul reporting capabilities, the Job Cost report has been retired and is no longer accessible.
Improved
Fixed
Software Update 6.1.0
New Improvements:
- We've added a Requested Delivery Date update prompt for situations where the initially selected date has expired. Customers will now be prompted to select a new Requested Delivery Date if their original date is no longer valid. This new option can be displayed to the customer at the time of job submission, or instead popup straight away when opening a quote for editing. This ensures that delivery schedules remain accurate and up-to-date.
- We’ve converted customer dropdowns to be searchable, enhancing overall usability. These dropdown boxes now dynamically filter options as you type, making it easier to find the right selection. This applies at the Room & Product level, as well as in Customer account settings.
- We've converted the Customer List page to a new interface design, implementing new front end technology and added some great new features like columns which can be dragged and re-arranged to suit your requirements.
- We've updated the Add/Edit customer screen, moving it to be in line with styling of the customer interface.
- The room defaults have been removed from the Job Details PDF for a cleaner look. This change does not impact the CSV output, ensuring that all necessary information is still available in reports.
New Fixes:
- Fixed an issue with the unavailable pop-up for hinge and drawer options at the Room and Product level, which was displaying incorrect options and automatically changing their values.
- We've added a Requested Delivery Date update prompt for situations where the initially selected date has expired. Customers will now be prompted to select a new Requested Delivery Date if their original date is no longer valid. This new option can be displayed to the customer at the time of job submission, or instead popup straight away when opening a quote for editing. This ensures that delivery schedules remain accurate and up-to-date.
- We’ve converted customer dropdowns to be searchable, enhancing overall usability. These dropdown boxes now dynamically filter options as you type, making it easier to find the right selection. This applies at the Room & Product level, as well as in Customer account settings.
- We've converted the Customer List page to a new interface design, implementing new front end technology and added some great new features like columns which can be dragged and re-arranged to suit your requirements.
- We've updated the Add/Edit customer screen, moving it to be in line with styling of the customer interface.
- The room defaults have been removed from the Job Details PDF for a cleaner look. This change does not impact the CSV output, ensuring that all necessary information is still available in reports.
New Fixes:
- Fixed an issue with the unavailable pop-up for hinge and drawer options at the Room and Product level, which was displaying incorrect options and automatically changing their values.
New
Improved
Fixed
Software Update 6.0.8
New Feature:
- You can now use the / key on your keyboard to automatically popup the search box in your manufacturer account).
- We've added a new 'Shortcut' section to the toolbar, allowing you save quick access links to your most frequently used menu options.
- You can now use the / key on your keyboard to automatically popup the search box in your manufacturer account).
- We've added a new 'Shortcut' section to the toolbar, allowing you save quick access links to your most frequently used menu options.
New Improvements:
- We're excited to announce a complete redesign of the header menu in your manufacturer portal! This update enhances both functionality and aesthetics for a smoother experience.
- We’ve added more product templates to the Product Visualiser, including:
- Corner base cabinets
- Corner pantry cabinets
- U Shape Shelf component product (including labels to indicate sides)
- We’ve enhanced text wrapping on the Colour browser for doors, ensuring a better and more readable display of color options.
- We're excited to announce a complete redesign of the header menu in your manufacturer portal! This update enhances both functionality and aesthetics for a smoother experience.
- We’ve added more product templates to the Product Visualiser, including:
- Corner base cabinets
- Corner pantry cabinets
- U Shape Shelf component product (including labels to indicate sides)
- We’ve enhanced text wrapping on the Colour browser for doors, ensuring a better and more readable display of color options.
New Fixes:
- Fixed the preview of U Shape shelf products within the Product Visualiser for more accurate representations.
- Performed further fixes on the Product Visualiser to enhance overall performance and reliability.
- The drag & drop reordering in the Customers’ favourite section in account settings now persists the new order of shuffled products, providing a smoother and more intuitive experience
- Fixed the visual-only glitch in the Category subtotal on the Assembly tab to display correctly
- Resolved an error that appeared when saving Hinge/Drawer sets into Drill only settings.
- Resolved an issue with the Benchtop profiles editing page that was displaying as blank.
Improved
Fixed
Software Update 6.0.7
New Improvements:
- We've enhanced the application of the branding themes through the user interface to ensure a consistent experience with colours, typography, icons, and layout throughout the application. This improvement will ensure consistency in the application of themes.
New Fixes:
- We've resolved a visual glitch where adjustments to partition heights on 3 Part Products shelves were not reflecting correctly in the preview (only when positions were set in millimeters).
- Resolved an occasional issue where the loader would continue spinning while searching for a material or edge on Browse Colours once all materials were loaded.
- Removed the display of the 'Pricing is valid until' message if no maximum job price age has been set, ensuring it only appears when the manufacturer enables this option.
- The "Load More" functionality in the Customer Approved section of the manufacturer dashboard is now working as expected.
- Addressed inconsistencies in the API with material and door styles to improve reliability.
- We've enhanced the application of the branding themes through the user interface to ensure a consistent experience with colours, typography, icons, and layout throughout the application. This improvement will ensure consistency in the application of themes.
New Fixes:
- We've resolved a visual glitch where adjustments to partition heights on 3 Part Products shelves were not reflecting correctly in the preview (only when positions were set in millimeters).
- Resolved an occasional issue where the loader would continue spinning while searching for a material or edge on Browse Colours once all materials were loaded.
- Removed the display of the 'Pricing is valid until' message if no maximum job price age has been set, ensuring it only appears when the manufacturer enables this option.
- The "Load More" functionality in the Customer Approved section of the manufacturer dashboard is now working as expected.
- Addressed inconsistencies in the API with material and door styles to improve reliability.
New
Improved
Fixed
Software Update 6.0.6
New Features:
- We've added a new "Customer Approved" status for jobs. When a customer has approved price changes on a job, it will transition into this new state. This allows the manufacturer to choose whether to wait for payment or send it straight to production, providing more flexibility in managing orders.
- We've added a new "Customer Approved" status for jobs. When a customer has approved price changes on a job, it will transition into this new state. This allows the manufacturer to choose whether to wait for payment or send it straight to production, providing more flexibility in managing orders.
New Improvements:
- We've tightened up the Room Update feature so it will now only prompt customers to update products in their room if there are products in it. If no products in the room, the prompt will not show.
New Fixes:
- Tweaked the Unit of Measurement display on the minimum usage fee for benchtops on the job details page to match with the UOM set on the benchtop material (m2 or l/m).
- Adjusted the TDLD preview so that fingerpull rails are no longer displayed.
- Enhanced corner cabinet validation to better block customers from trying to enter left/right depths which are too small.
- Resolved an occasional time out error when downloading a CSV for the Jobs List page.
Improved
Fixed
Software Update 6.0.4
New Improvements:
- We’ve changed the wording from "Hinge Heights" to "Hinge Quantity per door" on the Job details PDF only for cabinet products that include doors and hinges.
- We’ve changed the wording from "Hinge Heights" to "Hinge Quantity per door" on the Job details PDF only for cabinet products that include doors and hinges.
- We've also updated the text on the "Something is wrong here" page to improve clarity and user experience. Customer logging out then back in again will clear cache and can sometimes resolve any browser issues.
- We’ve improved the display of Door/Drawer amount on PDFs when "Include Door Faces" is set to No (or customer is using the Non Supply material). This enhancement ensures clarity on product inclusions in the job documents.
- Added validation to the radius setting for the U-shape shelf to prevent values less than 30mm.
- Added a new email template to be triggered when a job in the "Pending Confirmation" status is approved by the customer with variation costs.
New Fixes:
- We've fixed a bug where dimensions for curved corners were flipped on the vertical bench piece.
- Fixed an small bug where customer labels would not show on the manufacturer dashboard when clicking the 'load more jobs' button.
- Resolved an issue with the colour browser to prevent infinite loading of shop material colours that are not enabled.
- Fixed an issue where the "drill only hinge" option was selectable even when "supply hardware" was enabled on the room default.
Improved
Fixed
Software Update 6.0.1
New Improvements:
- We've removed the character count and now allow text wrapping for lead times. This enhancement ensures that all your lead time details are easily visible and more readable without constraints.
- Improved edge colour matching and incorporated a new API for better precision.
- In response to feedback, we've adjusted the display of Assembled items on the job details PDF. Previously, the relevant field was marked as 'Assembly Needed' (Yes/No), whereas now the field title simply reads as 'Assembled'.
- Improved edge colour matching and incorporated a new API for better precision.
- In response to feedback, we've adjusted the display of Assembled items on the job details PDF. Previously, the relevant field was marked as 'Assembly Needed' (Yes/No), whereas now the field title simply reads as 'Assembled'.
New Fixes:
- Fixed the date format display for coupons as DD/MM/YY to ensure consistency with the Job details page
- Corrected the cart icon click issue so that it now works reliably on the first attempt.
- Removed the unpaid jobs status filter from the job list page for a cleaner view.
- Ensured missing fonts and font uploads for manufacturers are handled correctly.
- Resolved a bug where there was a display issue on the job breakdown report which listed incorrect subtotals (visual glitch only).
- Added validation checks to ensure the manual panel with height less than twice the material thickness saves the product without errors
- Corrected the cart icon click issue so that it now works reliably on the first attempt.
- Removed the unpaid jobs status filter from the job list page for a cleaner view.
- Ensured missing fonts and font uploads for manufacturers are handled correctly.
- Resolved a bug where there was a display issue on the job breakdown report which listed incorrect subtotals (visual glitch only).
- Added validation checks to ensure the manual panel with height less than twice the material thickness saves the product without errors
New
Improved
Fixed
Software Update 6.0.0 - New Version!
New Features:
- We're thrilled to unveil our Product Visualiser, designed to significantly improve your customer's ordering experience. Customers can witness the immediate impact of customisations for a vivid and realistic representation of product configurations.
👀 Watch the intro video here ▶️ https://www.youtube.com/watch?v=I4nRQE-jVJI&feature=youtu.be
- We're thrilled to unveil our Product Visualiser, designed to significantly improve your customer's ordering experience. Customers can witness the immediate impact of customisations for a vivid and realistic representation of product configurations.
👀 Watch the intro video here ▶️ https://www.youtube.com/watch?v=I4nRQE-jVJI&feature=youtu.be
New Improvements:
- We've also enhanced the Material & Edge card on the Colour Browser tool under the New Selection section by adding a finish to the Material & Edge colour name.
- The Colour Browser now starts on the Door section, with all door types selected for your convenience.
New Fixes:
- Fixed the display of the percentage sign in the additional content section of the email template previews.
New
Fixed
Software Update 5.12.6
New Features:
- We've added a requested delivery date feature, allowing customers to specify a preferred delivery date for their orders. This enhancement gives you and your customers more control over delivery schedules and ensures a smoother planning process. Theis feature can be enabled via Tools > Settings > Preferences.
- We've added a requested delivery date feature, allowing customers to specify a preferred delivery date for their orders. This enhancement gives you and your customers more control over delivery schedules and ensures a smoother planning process. Theis feature can be enabled via Tools > Settings > Preferences.
New Improvements:
- We've made some UI improvements specifically aimed at enhancing readability on mobile devices. Now, the Top selection and Finger pull dropdown boxes utilise more space to ensure optimal readability on mobile screens.
New Fixes:
- As part of our move towards deprecating the old Job Properties PDF, we've resolved a bug where product images were occasionally overlapping tables.
New
Improved
Fixed
Software Update 5.12.4
New Features:
- We’ve added a new 'Additional Variations' function where you can create custom job-level variations that don't need to be assigned a specific product. Read the How-To guide on using this feature HERE.
These variations can be optionally allowed to be removable by the customer, upon the order being sent back to them for confirmation. This feature will give you and your customers more flexibility with variation management.
- We’ve added a new 'Additional Variations' function where you can create custom job-level variations that don't need to be assigned a specific product. Read the How-To guide on using this feature HERE.
These variations can be optionally allowed to be removable by the customer, upon the order being sent back to them for confirmation. This feature will give you and your customers more flexibility with variation management.
- Customers can now change their dispatch options on a job when the job has been reverted to them for confirmation (e.g they can change from Freight to Pickup if they're not happy with the cost that has been applied, or change from Pickup to Freight if they've decided to get the job delivered). More info on this can be found HERE.
New Improvements:
- We've added new functionality that automatically computes Minimum Charges when you're editing cost (e.g. reducing Minimum Usage Fees) on a job. This improvement simplifies the cost management process and reduces the chance of errors.
New Improvements:
- We've added new functionality that automatically computes Minimum Charges when you're editing cost (e.g. reducing Minimum Usage Fees) on a job. This improvement simplifies the cost management process and reduces the chance of errors.
New Fixes:
- We've resolved an issue where, when the user opened a job which had triggered a price reset (exceeded the amount of days you have set for quotes to be valid), the job variation popup would appear over the top of the price reset messages.
New
Fixed
Software Update 5.12.3
New Features:
- We've added a new feature which allows you to edit or delete the minimum job charge or minimum usage fee on customer orders, when accepting jobs and editing the cost. Perfect for when a customer has missed a part in a job, or has damaged a piece and requires a re-cut and you've still got an offcut from their previous order. Now, the customer can create a new order with the material and at job approval stage you can click Edit Cost and delete or modify the Minimum Usage Fee, or Minimum Charge Fee amount. Check out the How-to guide HERE.
New Fixes:
-Rectified an issue on the job report page where jobs that contained a minimum usage on benchtops were hiding the minimum usage breakdown.
Improved
Fixed
Software Update 5.11.10
New Improvements:
- We've improved the invoice numbering format to be clearer and relate to the Job Number for the order.
- Along with the above change, the Monthly Statements will also be updated to display only the invoice number (and therefore job number as well) adhering to the new format.
- We've also made the Job Details PDF the default PDF option for customers. This is visible/accessible via Tools > Settings > Preferences. The Job Properties PDF will phase out over the coming months.
- We've improved the invoice numbering format to be clearer and relate to the Job Number for the order.
- Along with the above change, the Monthly Statements will also be updated to display only the invoice number (and therefore job number as well) adhering to the new format.
- We've also made the Job Details PDF the default PDF option for customers. This is visible/accessible via Tools > Settings > Preferences. The Job Properties PDF will phase out over the coming months.
New Fixes:
- We've fixed a bug where the job number listed in the 'Your Xero is disconnected' emails wasn't quite correct
Improved
Fixed
Software Update 5.11.9
New Improvements:
- If the simplified job workflow is enabled - ‘The completed jobs table now reflects last updated instead of “Date Approved”.
New Fixes:
- Implemented a pop-up message and an email prompt to check Xero integration settings if this has been disconnected.
New
Improved
Software Update 5.11.8
New Features:
- We’ve added a pricing webhook, allowing clients to handle pricing externally from the system. This new feature provides greater flexibility in how you manage your pricing strategies, ensuring seamless integration with your existing workflows.
- There’s now also an order submission webhook available. This new feature enables external systems to permit and validate job submissions, approve automatically rather than going via a manual approval process.
- We’ve added a pricing webhook, allowing clients to handle pricing externally from the system. This new feature provides greater flexibility in how you manage your pricing strategies, ensuring seamless integration with your existing workflows.
- There’s now also an order submission webhook available. This new feature enables external systems to permit and validate job submissions, approve automatically rather than going via a manual approval process.
New Improvements:
- We've added more robust validations to shelf setbacks, preventing users from entering negative setback values, and also putting an upper limit on the maximum setback that can be applied, in reference to the cabinet depth.
New
Fixed
Software Update 5.11.6
New Features:
- We've added the ability to have a simplified job workflow (processing/quoting => straight to In Production/Completed) - get in contact with support if you'd like to enable this option.
- We've also added a tool to allow you to edit job status names, if you'd like to use different terminology to our default job statuses. This new tool is found under Tools > Settings > Preferences
Fixes:
- Restored the visibility of the left menu panel when the customer zooms their browser using a small screen size
- Rectified the brief flashing of the landing page at the login screen when 'Remember me' is used and the site is accessed in a new tab.
- We've added the ability to have a simplified job workflow (processing/quoting => straight to In Production/Completed) - get in contact with support if you'd like to enable this option.
- We've also added a tool to allow you to edit job status names, if you'd like to use different terminology to our default job statuses. This new tool is found under Tools > Settings > Preferences
Fixes:
- Restored the visibility of the left menu panel when the customer zooms their browser using a small screen size
- Rectified the brief flashing of the landing page at the login screen when 'Remember me' is used and the site is accessed in a new tab.
Improved
Fixed
Software Update 5.11.5
New Improvements:
- Replaced ‘Home’ icon button with a ‘Homepage’ link button beside manufacturer logo to easily navigate back to the dashboard.
- Replaced “Expand Menu” button with a hamburger menu icon to collapse and expand the main menu.
- Replaced “Expand Menu” button with a hamburger menu icon to collapse and expand the main menu.
- Simplified the Customer job list filters by only displaying relevant job statuses
New Fixes:
- Resolved an issue where materials changed at the Room and Product levels were not resetting horizontal grain and double-sided selection.
Improved
Fixed
Software Update 5.11.4
New Improvements:
- We’ve added a new look to Xero Integration page - displaying current connection status, connected organisation and have reformatted and prioritised sections.
New Fixes:
- Resolved incorrect placement of left menu panel on the API documentation page under Tools - Settings.
Improved
Fixed
Software Update 5.11.3
New Improvements:
- We've updated the ‘Continue Editing Job’ button on the customer dashboard to reflect ‘Confirm Costs’ if the last job the customer worked on has been sent back with Variation costs applied, for the customer to confirm.
- We've also updated the shelves button logic on products like Broom cabinets, to hide additional buttons when not in use ("auto positions" & "convert to mm" don't show if there are no shelves present). We've also done some optimisation to the alignment of fields.
New Fixes:
- Added support for automatic Xero invoices for jobs that are ‘Pending Resubmission’. When jobs are confirmed by the customer and moved to pending payment, now invoices will automatically be generated if Xero is connected.
- Resolved an issue causing benchtop images to not load on job PDFs.
- Resolved an issue causing benchtop images to not load on job PDFs.
Improved
Fixed
Software Update 5.11.2
New Improvements:
- We've added a small improvement to the Cart View by adding a loading spinner when an existing job is opened for the first time, to better show that products and total are still being loaded.
New Fixes:
- Resolved an issue where customers were not able to add custom rangehood, oven or microwave makes to cabinets.
- Implemented correct validation logic switching when moving between 'blanks' and 'non-blanks' benchtop materials
Other:
- The 'Client' feature (previously a 'premium customer' functionality) has been retired and removed from the customer interface
- We've added a small improvement to the Cart View by adding a loading spinner when an existing job is opened for the first time, to better show that products and total are still being loaded.
New Fixes:
- Resolved an issue where customers were not able to add custom rangehood, oven or microwave makes to cabinets.
- Implemented correct validation logic switching when moving between 'blanks' and 'non-blanks' benchtop materials
Other:
- The 'Client' feature (previously a 'premium customer' functionality) has been retired and removed from the customer interface
New
Improved
Fixed
Software Update 5.11.1
New Features:
- Introducing C.Ol Assistant! A state-of-the-art chat bot, to assist with features and functions of your manufacturer portal. Click the Cabinetry.Online logo at the bottom left of the screen to get started. This is in BETA mode and learning from interactions.
- We've also added the ability to assign external IDs to jobs and customers, along with accompanying tools to query them.
- Introducing C.Ol Assistant! A state-of-the-art chat bot, to assist with features and functions of your manufacturer portal. Click the Cabinetry.Online logo at the bottom left of the screen to get started. This is in BETA mode and learning from interactions.
- We've also added the ability to assign external IDs to jobs and customers, along with accompanying tools to query them.
New Improvements:
- The functionality of the mobile menu has been significantly improved, offering a more intuitive and user-friendly navigation experience on mobile devices. Improvements include: smarter handling of more/less options button, re-prioritising feature order to show most commonly used sections first, deprioritisation of 'Add Room' button to coincide with adoption of Room Assistant, added back Doors & Panels to menu so that users can be directed to desktop mode.
- Updated the library of Laminex & Formica colours to simplify the Finish so the materials are inline with the suppliers presentation. For instance, 'Laminex: Natural Solid Colour' and 'Laminex: Natural Woodgrain' has been updated to 'Laminex: Natural'.
- The functionality of the mobile menu has been significantly improved, offering a more intuitive and user-friendly navigation experience on mobile devices. Improvements include: smarter handling of more/less options button, re-prioritising feature order to show most commonly used sections first, deprioritisation of 'Add Room' button to coincide with adoption of Room Assistant, added back Doors & Panels to menu so that users can be directed to desktop mode.
- Updated the library of Laminex & Formica colours to simplify the Finish so the materials are inline with the suppliers presentation. For instance, 'Laminex: Natural Solid Colour' and 'Laminex: Natural Woodgrain' has been updated to 'Laminex: Natural'.
New Fixes:
- Resolved an issue where the 'Horizontal Grain' and 'Double sided' checkboxes were not showing upon re-editing a room.
New
Fixed
Software Update 5.11.0
New Features:
- Introducing Blanks. We've added support for pre-fabricated benchtops (Blanks) to the Benchtop Specifier. Benchtop profiles for blanks are automatically applied/removed based on the matrix options, as the customer updates their benchtop depth. E.g. benchtops less than 900 in depth can only be profiled on one side, and benchtops 900 in depth can only be ordered profiled on both sides, so the bench will auto-profile to meet these requirements.
- We've also added the ability to assign external IDs to Depots, and have added documentation for the API.
- We've also added the ability to assign external IDs to Depots, and have added documentation for the API.
New Fixes:
- Addressed an issue where saved inner drawer components were not allowing users to edit or change supply hardware inclusions once the product was added to an order
Improved
Fixed
Software Update 5.10.2
New Improvements:
- Introduced an enhancement for Benchtops curved end profiles that automatically adds or removes cut-offs where applicable
- Introduced an enhancement for Benchtops curved end profiles that automatically adds or removes cut-offs where applicable
New Fixes:
- Resolved an issue where the cart would unexpectedly collapse during a price reset
- Saving changes to a drawer cabinets height or depth is now reflected instantaneously with the updated values
- Resolved an issue where the cart would unexpectedly collapse during a price reset
- Saving changes to a drawer cabinets height or depth is now reflected instantaneously with the updated values
- Altered the colour browser behaviour on QFP products to ensure border widths remain consistent when different materials are chosen
Improved
Fixed
Software Update 5.10.1
New Improvements:
We've streamlined the manufacturer dashboard by removing the statistics table to enhance navigation and usability.
We've streamlined the manufacturer dashboard by removing the statistics table to enhance navigation and usability.
New Fixes:
- Finger pull rails prompt now displays when the room assistant is engaged.
- Enhanced Detailed Cart sidebar behaviour to ensure a seamless experience across devices, especially on smaller screens where the sidebar now remains perfectly in place.
- Addressed the discrepancy in invoice filenames on customer emails to now reflect job numbers rather than job IDs for improved clarity.
New
Improved
Fixed
Software Update 5.10.0
New Features:
- We've added the ability for customers to add arc ends and curved corners to benchtops in the Benchtop Specifier. This new feature allows customers to customise their benchtops further by incorporating arc ends and curved corners. Default radius options can be applied through your manufacturer account.
- We've added the ability for customers to add arc ends and curved corners to benchtops in the Benchtop Specifier. This new feature allows customers to customise their benchtops further by incorporating arc ends and curved corners. Default radius options can be applied through your manufacturer account.
New Improvements:
- We've also improved the way customers opt to add mid-rails to doors, now using "Add Horizontal/Vertical Rail" buttons to hide fields when not in use. This enhancement aims to declutter the interface and make it easier for customers to understand the process of adding mid-rails to doors.
New Fixes:
- We've patched a bug where jobs could be unsubmitted after being accepted, if clicking through specific email links. Users will now be redirected to the dashboard if a job is in a non-editable state. This fix ensures better workflow management and prevents inadvertent actions that could affect job submissions.
New
Improved
Fixed
Software Update 5.9.3
New Feature:
- We've added a new prompt to the job submission process, to ask the customer if they'd like to delete empty rooms in their order prior to submitting job. This means that customers who do not want to order products that are linked to a room (e.g, they only want to order benchtops or sundry items which are not tied to a room), will not get blocked at the job submission stage due to an empty room being unable to be submitted.
New Improvements:
- The Select Address section has been redesigned and improved for mobile view.
- We've added a new prompt to the job submission process, to ask the customer if they'd like to delete empty rooms in their order prior to submitting job. This means that customers who do not want to order products that are linked to a room (e.g, they only want to order benchtops or sundry items which are not tied to a room), will not get blocked at the job submission stage due to an empty room being unable to be submitted.
New Improvements:
- The Select Address section has been redesigned and improved for mobile view.
New Fixes:
- We've resolved a glitch where Room Assistant was prompting to utilise the double sided option on materials
- Resolved an item where in rare circumstances, products with default edge finishes weren't always showing the default edge finishes until after changing the material on the product
- Resolved an item where in rare circumstances, products with default edge finishes weren't always showing the default edge finishes until after changing the material on the product
- Fixed border defaults in QFP not always adhering to a door style's default border - issue was occurring when changing between product types.
- We also fixed a scenario where a job export may crash if it included item codes enabled in the export.
Improved
Fixed
Software Update 5.9.2
New Improvements:
- We've added the new colour browser option for both the Add/Edit Room page, as well as customer account settings. As part of this improvement, the previous 'Advanced Editor' is now no longer available.
New Fixes:
- Resolved an issue on the job creation page where clicking the "Cancel" button after clicking "New Address" would throw an address validation error.
- We've added the new colour browser option for both the Add/Edit Room page, as well as customer account settings. As part of this improvement, the previous 'Advanced Editor' is now no longer available.
New Fixes:
- Resolved an issue on the job creation page where clicking the "Cancel" button after clicking "New Address" would throw an address validation error.
- Fixed 'Non-Supply' not appearing as an option in the colour browser for carcase materials
New
Improved
Fixed
Software Update 5.9.1
New Feature!
- We've added an option for manufacturers to control which system emails are sent, across the different parts of the platform. Emails can now be sent based on:
- We've added an option for manufacturers to control which system emails are sent, across the different parts of the platform. Emails can now be sent based on:
- All Emails: (no changes to the current email sending logic)
- Customer Emails Only: (only emails destined for customers will be sent - none to Manufacturers e.g. job submissions)
- Manufacturer Emails Only: (only emails destined for Manufacturers will be sent - none to Customers e.g. job submissions, unsubmissions, job approvals etc).
- Disable Emails: (no emails will be sent from the platform, other than crucial account access emails - password reset)
New Improvements:
- We've added "OPTIONAL" to product sizes, gaps and door margins to better help new customers understand that these fields aren't mandatory and can use manufacturer-set defaults.
- The switch to 'old View' on the Doors & Panels (QFP) screen has now been disabled, making the old view no longer accessible to customers. This functionality will be decommissioned and removed entirely in a future release.
New Fix:
- Resolved a bug where the new Variation Confirmation popup box was missing buttons on jobs where the manufacturer had applied $0 to all variations.
New
Improved
Software Update 5.9.0
New Features!
- We've added new tools for better management of customer's product variations. After sending a job back to a customer for confirmation of the variation costs which have been added, the customer will be presented with a popup to confirm the changes. The popup contains 3 options:
- We've added new tools for better management of customer's product variations. After sending a job back to a customer for confirmation of the variation costs which have been added, the customer will be presented with a popup to confirm the changes. The popup contains 3 options:
- Delete All Variations
- Edit Job
- Confirm Variations
1. Delete All Variations - this option will allow the customer to delete all variations that they had previously applied to their products, and the costings which had been applied. Once completed, the customer will be able to 'Approve without Variations', so that you don't need to go through a second step approval process.
2. Edit Job - this option will allow the customer to unlock their job for full editing (job returns to the 'Processing' status. All previous variations will remain on the product, as well as any costs you had applied for these previously, but will allow the customer to make modifications where required. This option will push the job back through the normal job approval process, so you can reconfirm variation costs and make any further changes required.
3. Confirm Variations - this option indicates that the customer is accepting the variations and the costs that you've applied. Once clicked, the job will follow the normal job submission prompts to check PDF and confirm submission.
The customer also has the option to delete individual variations, if they opt not to go ahead with the request after receiving the cost. To do this, they can click the 'Delete' icon (undo is possible if they make a mistake), and remove the variation from the product along with the cost that you had applied.
------
- We've added a range of placeholder items (ovens, rangehoods, fridges and dishwashers) to the layout designer, to allow customers to better map out their space.
Also, room elements (inner walls, doorways and windows) have been condensed under the 'Room Elements' button.
New Improvements:
- We've completed a series of performance works on the Doors & Panels page to drastically improve the loading time (over 75% decrease in loading times!) when product types are switched.
- Updated site application logo to have alt text and title to utilise manufacturer's name
Improved
Fixed
Software Update 5.8.1
New Improvements:
- We've completed a new round of mobile UI improvements, including: Address book, removing white space on bottom menu bar, horizontally align buttons on the Room Assistant popup.
- We've completed a new round of mobile UI improvements, including: Address book, removing white space on bottom menu bar, horizontally align buttons on the Room Assistant popup.
- BETA has finished for the Doors & Panels New view & Benchtop Specifier. The BETA flags have been removed from those sections of the app.
New Fix:
- Resolved the force-updating room defaults option not respecting "include doors" setting. Now, if a customer adds a product and opts to not 'Include doors', then changing room default colour will not override this.
New Fix:
- Resolved the force-updating room defaults option not respecting "include doors" setting. Now, if a customer adds a product and opts to not 'Include doors', then changing room default colour will not override this.
New
Improved
Fixed
Software Update 5.8.0
New Feature!
- We've added a new setting to the Preferences page (Tools > Settings > Preferences) to set which page a customer lands on after creating a job. The default option is the 'Add Product' page.
- We've added a new setting to the Preferences page (Tools > Settings > Preferences) to set which page a customer lands on after creating a job. The default option is the 'Add Product' page.
- We've also added a suite of new tools for Customer Alerts (pop up messages). You can now: Add formatting, links, images and more, preview messages before they are sent & delete any deployed messaged that haven't expired.
New Improvements:
- The Preferences page has been updated to use new styling and technology
- Additional customer fields (Business name, Mobile Number, ABN/ACN, Address2, URL) which were previously only able to be set via a customer account login are now visible and editable through the manufacturer portal.
- A new "Pending Confirmation" job status has been added to allow manufacturers to better track jobs which are awaiting customers to approve jobs which have been reverted back to the customer for them to approve the added variation costs.
- The Preferences page has been updated to use new styling and technology
- Additional customer fields (Business name, Mobile Number, ABN/ACN, Address2, URL) which were previously only able to be set via a customer account login are now visible and editable through the manufacturer portal.
- A new "Pending Confirmation" job status has been added to allow manufacturers to better track jobs which are awaiting customers to approve jobs which have been reverted back to the customer for them to approve the added variation costs.
- Vertical partition positions (when set as % position), will now update automatically when the customer alters the cabinet width (after changing partition percentage away from the default 50% value).
New Fix:
- Resolved an issue where a customer list CSV download may time out if it contained too many entries
New Fix:
- Resolved an issue where a customer list CSV download may time out if it contained too many entries
Improved
Software Update 5.7.2
New Improvement:
- We've added a new 'Name' field, which is text searchable, to all pricing / component lists. This replaces the existing name letter dropdowns
- We've added a new 'Name' field, which is text searchable, to all pricing / component lists. This replaces the existing name letter dropdowns
- The Old view of the Doors & Panels screen is set to be discontinued from 1st April, 2024. A popup notice now shows displaying this information when the users toggle to switch to the old view.
- Layout designer preview for PDFs now use newer front end generation
Software Update 5.7.1
New Improvements:
- The set password page for new customer accounts now uses the same layout as the password resetting page, also dropping the 'powered by Cabinetry.Online' when proper branding elements have been applied.
- The job creation page has been improved for better alignment and responsiveness for mobile and tablet
- The speed of the quick add to cart feature in the Top Down Layout Designer and KD Max import has been improved considerably
New Fixes:
- Fixed the KD Max Import incorrectly going to the product validation when it was not required. Also improved error messaging where there is an issue with the particular product which requires customer changes to meet product validation requirements.
- Resolved an issue where some sundry item images were not displaying on the catalogue / Browse screen.
- Resolved an issue where some sundry item images were not displaying on the catalogue / Browse screen.
New
Improved
Fixed
Software Update 5.7.0
New Feature!
- We’re excited to add Address Autocomplete for customers, powered by Google Maps API. The new tool will allow users to start typing in a partial address, with the search returning a a drop down list of suggested addresses to choose from. The user can refine this by typing more of their address, and also has the option for manual entry of an address if it is not found.
- We’ve also implemented Multiple delivery addresses for customers - allowing users to name/save/edit/delete and store multiple addresses in an Address Book on their account.
New Improvements:
- Minimum freight & account status (suspended/active) is now displayed on the customer list as well as the customer list .csv file
- The customer-facing product editor page has been improved for mobile and tablet screens providing a better preview of products. It includes a new 'card style' listing of the product and hardware supply options for more visual and easier selection.
New Fix:
- Resolved an issue where the job list page wasn't displaying the download CSV button when it was filtered by the 'Pending Payment' status.
New
Improved
Fixed
Software Update - 5.6.2
New Features!
- We’re excited to introduce a new Colour Browser tool for Doors/Materials/Edges to help customers to more easily find their desired options. The Colour Browser is a full screen popup to provide a more visual way to navigate available doors, colours and finishes.
🎓 To see the full tutorial, go here: Colour Browser Tutorial 👈
- Custom Fonts for Customer UI. We've added 3 default site fonts, that you can now utilise on your customer interface. Alternatively, there is a new 'Custom Font' option where users can upload unique fonts to be used on the customer interface (Regular, bold & italic)
- File Uploads for every customer type. Now, all customers are able to add supporting documentation to their order. An additional section is added to Tools > Settings > Manufacturer Preferences to enable/disable the ability for their customers to add attachments to a job.
New Improvements:
- The default site font has been updated to a newer, cleaner and more readable font.
- New branding options added. New settings have been added including:
🎓 To see the full tutorial, go here: Colour Browser Tutorial 👈
- Custom Fonts for Customer UI. We've added 3 default site fonts, that you can now utilise on your customer interface. Alternatively, there is a new 'Custom Font' option where users can upload unique fonts to be used on the customer interface (Regular, bold & italic)
- File Uploads for every customer type. Now, all customers are able to add supporting documentation to their order. An additional section is added to Tools > Settings > Manufacturer Preferences to enable/disable the ability for their customers to add attachments to a job.
New Improvements:
- The default site font has been updated to a newer, cleaner and more readable font.
- New branding options added. New settings have been added including:
- Colours for Dashboard and Cart Icons, and accompanying button text
- Colour for Login page header
- Background colour for menu on mobile view
New Fixes:
- The cart icon (top right on desktop view) now adheres to the same colour schemes outlined in the branding settings when the cart is collapsed.
- Resolved a small visual glitch where it appeared that customers were able to order products as Assembled, but no hardware supplied. This was a UI glitch only, and products would be successfully added to the job and displayed in the PDF as Assembled and Hardware supplied.
New
Improved
Fixed
Software Update - 5.6.0
New Feature!
- We've added a new feature to permit manufacturers to disable the ability for their customers to edit their own account details.
New Improvements:
- Updated handling of estimated job completion dates, when a job is marked as pending payment. Now the customer email will include some text to state “Completion date is subject to change upon receipt of payment."
- The Add Room editor layout and responsiveness has been improved for mobile and tablet view.
New Fixes:
- Resolved an issue where the Job Details PDF option was getting disabled upon manufacturer settings changed
- Added cart refresh to ensure room totals are updated in line with product quantity changes in the detailed cart view
- Resolved an error which would occur when the customer selected the 'Continue Editing' option when saving items in QFP
- We've added a new feature to permit manufacturers to disable the ability for their customers to edit their own account details.
New Improvements:
- Updated handling of estimated job completion dates, when a job is marked as pending payment. Now the customer email will include some text to state “Completion date is subject to change upon receipt of payment."
- The Add Room editor layout and responsiveness has been improved for mobile and tablet view.
New Fixes:
- Resolved an issue where the Job Details PDF option was getting disabled upon manufacturer settings changed
- Added cart refresh to ensure room totals are updated in line with product quantity changes in the detailed cart view
- Resolved an error which would occur when the customer selected the 'Continue Editing' option when saving items in QFP
New
Fixed
Software Update - 5.5.0
New Features!
- We're excited to add two new tools as part of your on-going cost management on jobs: Minimum Usage Rollover & Yield
- We're excited to add two new tools as part of your on-going cost management on jobs: Minimum Usage Rollover & Yield
- Minimum Usage Rollover: Enables manufacturers to charge a minimum usage fee for the initial material sheets used per job, ensuring cost recovery for materials not absorbed into job costs. This rollover with occur X times (however amount of times you want to provision in the order) before it no longer becomes relevant to the customer.
- Expected Yield Factor: Allows manufacturers to set a yield percentage that adjusts material area costs to reflect the actual usable material, ensuring more accurate pricing.
New Fixes:
- Resolved a glitch where occasionally edge materials wouldn't match to material colour on room setting
- Fixed a bug where GST wouldn't show on benchtops when the 'Save and Continue Editing' option was selected (visual glitch only, GST value was added and would display on page refresh or submission)
Improved
Software Update - 5.4.11
New Improvements:
- We've added a new "door filter" dropdown filter to the material and edge lists to improve searchability
- We've added a new "door filter" dropdown filter to the material and edge lists to improve searchability
- Invisible shortcuts and total IDs have been added to the Job Turnover report to assist crawling by automation tools
- Added a spinner to the Include door faces/ no door faces option to indicate material loading when switching between options
Improved
Fixed
Software Update - 5.4.10
New Improvements:
- The customer dashboard UI has been improved for tablet and mobile. Includes: better utilisation of screen space, default landing on 'Quoted' jobs on mobile, vertical alignment of buttons on tablet and more.
- We've hidden the "drawer face height" field on some robe products to prevent confusion
- The customer dashboard UI has been improved for tablet and mobile. Includes: better utilisation of screen space, default landing on 'Quoted' jobs on mobile, vertical alignment of buttons on tablet and more.
- We've hidden the "drawer face height" field on some robe products to prevent confusion
- Order Facilitation Fees are now displayed in more places: customer list, customer report, invoices, monthly statements.
- The customer variations popup has been widened to allow for better display of multi-line variation requests
- The customer variations popup has been widened to allow for better display of multi-line variation requests
New Fixes:
- Updated the title of the corner spec popup on Benchtop Specifier to show clip/notch based on the users selection
- Fixed an error which appeared if trying to download a blank customer list CSV (e.g. if filters had been applied and no customers met the filter criteria)
Improved
Fixed
Software Update - 5.4.9
New Improvements:
- Page titles (displayed on tabs) have been added to to all manufacturer login pages - making it easier to navigate when multiple tabs are open.
- Optimised Improve dashboard load times for manufacturers and admins
New Fixes:
- Resolved an issue where estimated completion dates were being incorrectly set on jobs with variations, if they were not manually overridden
- Added a tweak to refresh dashboard cart when a room is deleted so that products do not show that they are still in the job (would show correctly after a refresh).
- Page titles (displayed on tabs) have been added to to all manufacturer login pages - making it easier to navigate when multiple tabs are open.
- Optimised Improve dashboard load times for manufacturers and admins
New Fixes:
- Resolved an issue where estimated completion dates were being incorrectly set on jobs with variations, if they were not manually overridden
- Added a tweak to refresh dashboard cart when a room is deleted so that products do not show that they are still in the job (would show correctly after a refresh).
- Corrected a glitch where if a customer set job as delivery, then changed to pickup, it would still show delivery addresses on the job confirmation email
- Resolved a bug where locked drawer products (e.g. bin units) were being changed when force-updating products through the room update feature.
Quality of Life Changes:
- Removed item summary report, this will be replaced down the line with a more sturdy and functional reporting option
- Clean up links to old and unused sections (e.g. old help & support links)
- Removed supplier filter in job list
Improved
Fixed
Software Update - 5.4.7
New Improvement:
- Improve the layout of the login page for tablet and mobile to be more dynamic
- Improve the layout of the login page for tablet and mobile to be more dynamic
New Fixes:
- Resolved a quirk where the Cabinetry.Online logo was missing Firefox browsers, on the generic login page (no subdomain)
- Implemented better error handling for customer report page when customers have invalid benchtops in a job
- Fixed logging out on mobile occasionally showing a white screen
Fixed
Software Update - 5.4.6
New Fixes:
- Resolved a visual glitch where coupon details were being hidden when the 'Toggle details' was clicked on the job report
- Fixed images from overlapping descriptions in the sundries section
- Resolved a visual glitch where coupon details were being hidden when the 'Toggle details' was clicked on the job report
- Fixed images from overlapping descriptions in the sundries section
New
Fixed
Software Update - 5.4.5
New Feature!
- We've added the ability to also export item codes (for materials / doors/ benchtops) as part of the job CSV
- Added a button option for job data to be downloaded in JSON format
New Fixes:
- We've added the ability to also export item codes (for materials / doors/ benchtops) as part of the job CSV
- Added a button option for job data to be downloaded in JSON format
New Fixes:
- Resolved a bug which showed the word "undefined" appearing for some brand names in the material string
Improved
Fixed
Software Update - 5.4.4
New Improvements
- Material type dropdown filter has been added to the edge materials page
- Material type dropdown filter has been added to the edge materials page
- Suspend fields to the customer list API
- Add item codes to door styles
New Fixes
- Fix end-only flag on edges not being set correctly on copied edge profiles (Benchtop Specifier)
- Fix margins not locking correctly when selecting finger pull options
Improved
Fixed
Software Update - 5.4.3 (last release for 2023)
New Improvements:
- We've released a stack of UI improvements:
- Screen layouts dynamically change to better suit available screen space (columns change from 6 to 4 to 2 depending on screen size and device)
- Supply icons (hardware/flatpack/assembled/adj legs) have been resized and formatted to use less screen space
- Eliminated overlapping elements when entering notes on a product
New Fixes:
- Updated Benchtop Specifier preview to resolve a bug where clipped/notched corners which had a profile applied were not shown
- We've released a stack of UI improvements:
- Screen layouts dynamically change to better suit available screen space (columns change from 6 to 4 to 2 depending on screen size and device)
- Supply icons (hardware/flatpack/assembled/adj legs) have been resized and formatted to use less screen space
- Eliminated overlapping elements when entering notes on a product
New Fixes:
- Updated Benchtop Specifier preview to resolve a bug where clipped/notched corners which had a profile applied were not shown
Fixed
Software Update - 5.4.2
New Fixes
- Fixed job details (job name, description etc) being missing when clicking the 'Edit Job Details' button
- Fixed job details (job name, description etc) being missing when clicking the 'Edit Job Details' button
- Applied a patch to resolve customers being unable to save products when manufacturers hide the drawer system that the customer had selected in the room
New
Improved
Software Update - 5.4.0
New Features!
- We've implemented a new room assistant tool to help customers add products immediately, and intuitively adapt product preferences as they navigate through an order.
- We've implemented a new room assistant tool to help customers add products immediately, and intuitively adapt product preferences as they navigate through an order.
- Added a new tutorial-style popup to better explain new features and app updates
- We've also transformed the way Room Updates work, so now a user can unconditionally update products when saving rooms - this means that the products do not need to be matching room defaults in order to be eligible to be updated with room changes. Previous options (Update Room Only, or Update Products Matching Room Defaults) still remain under the 'More Options' button
- We've also transformed the way Room Updates work, so now a user can unconditionally update products when saving rooms - this means that the products do not need to be matching room defaults in order to be eligible to be updated with room changes. Previous options (Update Room Only, or Update Products Matching Room Defaults) still remain under the 'More Options' button
New Improvements:
- Added fields to set markup and minimum freight and cost to customer registration API via wordpress Forminator plugin
- Added fields to set markup and minimum freight and cost to customer registration API via wordpress Forminator plugin
New
Improved
Fixed
Software Update - 5.3.6
New Feature!
- We've implemented a new feature where the User Interface now regularly checks if there have been version changes in the back end and automatically refreshes the page if we have released a new version.
New Improvements:
- Benchtop Specifier has been restricted on mobile view, while we work on improved screen layout and usability. Users will now be instructed that the module can only be accessed via desktop only.
New Fixes:
- Resolved an edge case where, when a customer is selecting a pickup from a depot point, the email incorrectly listed the customer's address as the pickup point instead of the depot address.
- Fixed the supply hardware checkbox being "locked" in old QFP view after changing from the default selection
- We've implemented a new feature where the User Interface now regularly checks if there have been version changes in the back end and automatically refreshes the page if we have released a new version.
New Improvements:
- Benchtop Specifier has been restricted on mobile view, while we work on improved screen layout and usability. Users will now be instructed that the module can only be accessed via desktop only.
New Fixes:
- Resolved an edge case where, when a customer is selecting a pickup from a depot point, the email incorrectly listed the customer's address as the pickup point instead of the depot address.
- Fixed the supply hardware checkbox being "locked" in old QFP view after changing from the default selection
New
Improved
Software Update - 5.3.5
New Feature!
- We've added a new option in Benchtop Specifier to allow manufacturer to create new Benchtop Profiles which are selectable on benchtop ends only.
New Improvements:
- We've added a new option in Benchtop Specifier to allow manufacturer to create new Benchtop Profiles which are selectable on benchtop ends only.
New Improvements:
- Another round of performance improvements to the room editor - users should notice rooms load up in seconds, and any further loading is contained within dropdown lists. Room is also able to be saved straight away upon clicking option, if the customer does not want to change any room default settings.
- Removed a redundant column from Benchtop Specifier matrix export to make it clearer which are the required fields
- Allow non-post formed profiles to reference SP/DP for form factor pricing
New
Improved
Software Update - 5.3.4
New Feature!
We are excited to introduce our newest feature, fully customisable Customer Labels, designed to increase the manageability and visibility of customer accounts for better organisation and analysis.
We are excited to introduce our newest feature, fully customisable Customer Labels, designed to increase the manageability and visibility of customer accounts for better organisation and analysis.
-
Enhanced Visibility: Users can now apply customisable labels to customer accounts. These labels are prominently displayed above the customer’s name on all screens, ensuring easy identification at a glance. To help keep things clear, hovering over a label will show a tooltip with the full label name.
- Advanced Filtering: Searching for customers has never been easier. With Customer Labels, users can filter their customer lists based on the labels assigned. This feature streamlines the process of grouping and finding customers according to specific criteria or attributes.
-
CSV Export Integration: The labels are now included in the CSV export of the customer list. This addition ensures that customer segmentation can be carried over seamlessly when importing your customer list into marketing platforms such as Mailchimp, enhancing your marketing efforts through targeted campaigns.
-
Reporting Tools Upgrade: Customer Labels have been integrated across various reporting screens. Users can gain deeper insights and perform granular analysis on customer quoting, job turnover, and job summaries, all with the added dimension of label-based segmentation.
-
Dynamic Use Cases: The new tagging system is dynamic, allowing for a variety of applications. For instance, users can tag new customers who require initial contact and remove the tag once the engagement is complete, ensuring no customer is overlooked.
-
Endless Possibilities: The Customer Labels feature opens the door to numerous possibilities for managing customer interactions and analysing data. We look forward to seeing how our users will leverage this new tool to optimise their customer engagement strategies.
We believe this feature will empower our users to categorise and analyse their customer base in more meaningful ways. Try out Customer Labels today and take your customer management to the next level!
New Improvements:
- Reduce icon size on hardware and assembly options to better utilise screen space
- Restore special type for the drawer faces toggle
Improved
Fixed
Software Update - 5.3.3
New Improvements:
- We've released a stack of speed improvements to the site, including loading Rooms (hardware items now load almost instantaneously), product load times as well as product saving. Users should notice significant improvements to the loading times throughout the app in general.
- Old QFP now processes save requests for 2 products concurrently - speeding up overall save times.
New Fix:
- Resolved a slightly incorrect door hang display on pantries with return panels
- We've released a stack of speed improvements to the site, including loading Rooms (hardware items now load almost instantaneously), product load times as well as product saving. Users should notice significant improvements to the loading times throughout the app in general.
- Old QFP now processes save requests for 2 products concurrently - speeding up overall save times.
New Fix:
- Resolved a slightly incorrect door hang display on pantries with return panels
Improved
Software Update - 5.3.2
New Improvements:
- Add a more info question mark on glass sub panels and rename the field
- Improve performance of old QFP screen
New
Improved
Fixed
Software Update - 5.3.1
New Feature!
- We've added a new "prefix" field to Benchtop Specifier edge profiles so that a material can have a different price matrix based on the profile that is selected.
- We've added a new "prefix" field to Benchtop Specifier edge profiles so that a material can have a different price matrix based on the profile that is selected.
New Improvements:
- Condense variations and minimum usage fees into more-info popups
New Fixes:
New Fixes:
- Resolved a glitch where the cart details were not updating automatically (unless user refreshed page) when dimensions were changed on products from the layout designer
- Fixed an edge-case crash when benchtop was saved with edge profiles, then edited and all edges set to not visible.
- Fixed an edge-case crash when benchtop was saved with edge profiles, then edited and all edges set to not visible.
- Prevented products being flagged as invalid when hardcoded hardware used on them (e.g. bin units) were set to using drill-only hardware by the manufacturer
New
Software Update - 5.3.0
New Feature!
- We've implemented a new material selector for the new Benchtop Specifier. This intuitive and visual format will be rolled out over other material selection screens in the app over the coming months
- We've implemented a new material selector for the new Benchtop Specifier. This intuitive and visual format will be rolled out over other material selection screens in the app over the coming months
Improved
Fixed
Software Update - 5.2.3
New Improvements:
- Standardise how material strings are displayed throughout the app. Now it is displayed everywhere as {Colour Name} {Finish Name} - {Thickness} {Brand} {Substrate}
- Add selectable line weighting for benchtop edge profiles, so manufacturers can utilise thick lines
New Fixes:
- Standardise how material strings are displayed throughout the app. Now it is displayed everywhere as {Colour Name} {Finish Name} - {Thickness} {Brand} {Substrate}
- Add selectable line weighting for benchtop edge profiles, so manufacturers can utilise thick lines
New Fixes:
- Resolved a glitch where hard-defaulted border widths weren't applying correctly to products in the old QFP view
Improved
BETA-only access finished - new Doors & Panels screen & Auto Save
BETA-only access has now finished for the new QFP / Doors & Panels screen.
All customers will now see the search function and get access to the auto save and speed improvements by default.
Here's some quick user guides, for your reference:
🚪 Using the new Doors & Panels Screen
💾 Doors & Panels - Auto Save
*A log out / log in may be required for the customer to see this change
All customers will now see the search function and get access to the auto save and speed improvements by default.
Here's some quick user guides, for your reference:
🚪 Using the new Doors & Panels Screen
💾 Doors & Panels - Auto Save
*A log out / log in may be required for the customer to see this change
Improved
Fixed
Software Update - 5.2.2
New Improvements:
- Update non-postformed profiles to permit the 'restrict adjacent edge' option
- Improve customer interaction feature:
- Update non-postformed profiles to permit the 'restrict adjacent edge' option
- Improve customer interaction feature:
- Remove date stamp from customer interaction section on dashboard, for more space for activity detail
- Reorganise layout of the customer interaction page
- Permit editing of the status (open/closed) without text also going into edit mode
- Use pop-up screen for viewing activities when there is a 'view more' option
- Add a button to 'Add Activity' from the Customer Interactions page
- Default status on the Customer Report screen is now to show 'Any' rather than 'Open' so that customer interactions history is visible without selecting 'Any'
New Fixes
- Resolved a KD Max import issue
- Reorganise layout of the customer interaction page
- Permit editing of the status (open/closed) without text also going into edit mode
- Use pop-up screen for viewing activities when there is a 'view more' option
- Add a button to 'Add Activity' from the Customer Interactions page
- Default status on the Customer Report screen is now to show 'Any' rather than 'Open' so that customer interactions history is visible without selecting 'Any'
New Fixes
- Resolved a KD Max import issue
Improved
Fixed
Software Update - 5.2.1
New Improvements:
- Default thickness on benchtop module is now 33mm. If no 33mm are available, then the fallback default thickness will be the first in the list
- Improve responsiveness of detailed cart view and login screen
- Improve responsiveness of detailed cart view and login screen
- Improve experience for benchtop-only manufacturers:
- Permit jobs to be created and submitted without a 'Room' providing there is at least 1 benchtop or sundry item.
- Don't run 'Add Room' tutorial if add room button is disabled
New Fixes:
- Resolved a preview glitch on the Base Door Drawer product previews
- Resolved a preview glitch on the Base Door Drawer product previews
- Refactor default delivery date calculation to prevent infinite loops
- Added in missing "saved to cart" message to flash briefly on the pricing section of the new Doors & Panels (QFP) screen when a product is auto saved
- Fix page error when users select incompatible edge profiles and materials on benchtops
New
Improved
Fixed
Software Update - 5.2.0
New Features!
- We've added a new Autosave feature on the Doors & Panels (QFP) screen. Now, when the customer adds a new item / copies an item / or otherwise selects a different item line, the previously focused product will save once focus shifts to the new / copied / newly edited item.
- Allow manufacturers to set product images and names
- Allow custom product minimums and maximums heights/widths/depths and default width size
- Allow manufacturers to set product images and names
- Allow custom product minimums and maximums heights/widths/depths and default width size
New Improvements:
- The hinge hole section on Doors & Panels is now hidden if the door hang is set to none, or client has selected the 'None' hinge
- Improve benchtop CSV output & updates for CSV corner output to be more compatible with WoodCAM
New Fix:
- Resolved a bug where grained material validation wasn't working in certain circumstances
New
Improved
Fixed
Software Update - 5.1.7
New Features:
- We added a new option for manufacturers to permanently delete (not just hide) unused materials/edges/hardware/doors
- We added a new option for manufacturers to permanently delete (not just hide) unused materials/edges/hardware/doors
- Add reCAPTCHA to signup forms to prevent spam signups
New Improvements:
- Updated the library of benchtop edge profile symbols to use a finer weighting of the lines
- Customer favourites now checks product library again upon loading to ensure no hidden products are shown
New Fixes:
- Resolved a display issue where custom colour fields listed an extra label, and displayed partially off-screen when using the "advanced" material selector
- Resolved a display issue where custom colour fields listed an extra label, and displayed partially off-screen when using the "advanced" material selector
New
Improved
Fixed
Software Update - 5.1.6
New Feature!
- We've added the ability for symbols to be applied to benchtop edge profiles
New Improvements
- The save/update on a product is temporarily disabled when the 'No Doors/drawer face' option is selected, to allow the non-supply option to display
New Fixes
- Restore previous GFP customer CSV download
- Fix QFP product API showing hidden products
- We've added the ability for symbols to be applied to benchtop edge profiles
New Improvements
- The save/update on a product is temporarily disabled when the 'No Doors/drawer face' option is selected, to allow the non-supply option to display
New Fixes
- Restore previous GFP customer CSV download
- Fix QFP product API showing hidden products
New
Improved
Software Update - 5.1.4
New Feature!
- We've expanded on the existing 'Customer interactions' section on the customer report, and added 2 new sections to help you make the most of this feature:
- We've expanded on the existing 'Customer interactions' section on the customer report, and added 2 new sections to help you make the most of this feature:
- We've added a summary to your dashboard, showing a summary of current 'Open' interactions (e.g. things you might need to follow up on)
- We've also created a new 'Customer Interactions' dashboard (find under Customers > Customer Interactions from your toolbar)and improve customer interaction functionality
New Improvements:
- Replaced 'Customer' dropdown lists on various pages (job list, materials, edges, hardware, parts, doors) with text-based search instead. This speeds up page loading times, and makes it easier to find customer accounts.
- Make variation 'this may incur additional costs...' message to display immediately upon clicking 'Variation Request'
- Added some improvements to the new Product Page layout including:
- Make variation 'this may incur additional costs...' message to display immediately upon clicking 'Variation Request'
- Added some improvements to the new Product Page layout including:
- Some further visual tweaks to optimise space and page layout
- Clear variation/notes if the customer hits the (X) button
- Added icons for 'Include drawers/doors faces' option
New
Improved
Fixed
Software Update - 5.1.2
New Feature!
- We've added a new standalone benchtop specifier PDF, which will be generated once a job is approved. This will a table on the PDF containing your company details, job # and name and only show the benchtop/s added to the job. This has been added to make it quicker for you to forward the PDF on to your benchtop supplier for easy ordering of customer top orders.
- We've added a new standalone benchtop specifier PDF, which will be generated once a job is approved. This will a table on the PDF containing your company details, job # and name and only show the benchtop/s added to the job. This has been added to make it quicker for you to forward the PDF on to your benchtop supplier for easy ordering of customer top orders.
New Improvements:
- Minimum charge fees now only show to customers when they have 1 or more products added to a job. Until a product is added, the field will be invisible and job total will show as $0
- Improve shelf/door previews for 2 and 3 part cabinets and cabinets with partitions to better show cabinet construction
- The "Convert to %" and "Convert to mm" buttons on advanced shelf settings have been combined into 1 button. This will show the inverse of whatever the shelf position field is showing. E.g. if showing as %, then the button will read as "Convert to mm"
- Improve shelf/door previews for 2 and 3 part cabinets and cabinets with partitions to better show cabinet construction
- The "Convert to %" and "Convert to mm" buttons on advanced shelf settings have been combined into 1 button. This will show the inverse of whatever the shelf position field is showing. E.g. if showing as %, then the button will read as "Convert to mm"
- Updated the price reset alert popup message to show job# and name of affected job
New Fixes:
- Updated label on Fridge Split Door cabinets to reflect correction for "bottom section height"
- Prevent setting blank values in benchtop pricing matrices
- Prevent benchtop edge profiles being duplicated when visibility is toggled
- Resolved notes not being saved in old QFP editor
- Resolved notes not being saved in old QFP editor
New
Improved
Fixed
Software Update - 5.1.0
New Feature:
- The new Benchtop Specifier produces benchtops as a top-level job item, instead of having the requirement of the user needing to add a room first.
- Benchtop Items added in through the new Benchtop Specifier now are displayed in the Detailed Cart View
- The new Benchtop Specifier produces benchtops as a top-level job item, instead of having the requirement of the user needing to add a room first.
- Benchtop Items added in through the new Benchtop Specifier now are displayed in the Detailed Cart View
New Fixes:
- Updated calculations to better handle multiple door products in the new fingerpull rail prompts
- Updated calculations to better handle multiple door products in the new fingerpull rail prompts
- Resolved a bug where the variation banner was not showing on job report for benchtop-only jobs
New
Improved
Fixed
Software Update - 5.0.7
New Feature!
- We've implemented a revamped product editor with new sections to better detail the composition of the cabinet and components supplied
New Improvements:
- Split Notes & Variations up, notes now lives under the product image and has been renamed to 'My Notes' for better clarity about it's purpose.
- Add warning banner, and prompts to update to a more current version at top of screen when customer is accessing the portal from unsupported browsers.
- We've implemented a revamped product editor with new sections to better detail the composition of the cabinet and components supplied
New Improvements:
- Split Notes & Variations up, notes now lives under the product image and has been renamed to 'My Notes' for better clarity about it's purpose.
- Add warning banner, and prompts to update to a more current version at top of screen when customer is accessing the portal from unsupported browsers.
New Fixes:
- Fix QFP showing incorrect door styles when switching to products with doors
Improved
Fixed
Software Update - 5.0.6
New Improvements:
- Enhance drawer pack validation rules to permit different minimum height on drawers where the drawer is part of a 'Collective Faces' option (min cut height, drawers)
- Enhance drawer pack validation rules to permit different minimum height on drawers where the drawer is part of a 'Collective Faces' option (min cut height, drawers)
- Enable new Benchtop Specifier to non-BETA customers, if the manufacturer has Benchtop Module enabled in settings but not Benchtop Designer (legacy)
New Fixes:
- Resolved certain scenarios where emails were being triggered to customers despite the 'notify customer' checkbox being disabled.
- Corrected a glitch where product count included deleted sundries in job CSV
- Fixed a back-end quirk where if all benchtop brand data was deleted, new materials could not be added.
Fixed
Software Update - 5.0.5
New Fixes:
- Resolved a bug where estimated completion date was being reset when marking jobs as complete using new bulk update tool
- Resolved a bug where estimated completion date was being reset when marking jobs as complete using new bulk update tool
- Resolved a bug where grain restrictions not being validated when initially loading a product
- Disallow creation of products hidden by manufacturers
- Resolved a scenario where jobs could be submitted with empty rooms
- Permit jobs to be submitted without a room, providing it contains a sundry item.
New
Improved
Software Update - 5.0.4
New Features:
- Add tool to mark jobs as completed in bulk
- Add tool to mark jobs as completed in bulk
New Improvements:
- Add CSV exports to benchtop material pages
- Fix blank cells causing benchtop pricing matrix imports to fail
- Improve layout and appearance of buttons on the benchtop material pages
New
Fixed
Software Update - 5.0.2
New Improvement:
- Update domain selection for email links to reference the domain that the user is accessing the site from, for consistency.
New Fixes:
- Update domain selection for email links to reference the domain that the user is accessing the site from, for consistency.
New Fixes:
- Resolved a glitch where sundry categories appearing in the list when the manufacturer didn't have any items active in that section
- Fixed the UI timing out if a coupon was used crashing the UI when they have an expiry date
New
Improved
Fixed
Software Update - 5.0.1
New Feature!
- We've added a new prompt when a customers adds a product to their cart which is using the 'Recessed handle option'. The customer will be asked if they'd like to also add rails for that cabinet at that point in time. We've also added a fingerpull rail calculator on job submission, where it will check if the customer has added enough estimated rail to the job to accommodate any cabinets which have had the recessed handle option applied.
- We've added a new prompt when a customers adds a product to their cart which is using the 'Recessed handle option'. The customer will be asked if they'd like to also add rails for that cabinet at that point in time. We've also added a fingerpull rail calculator on job submission, where it will check if the customer has added enough estimated rail to the job to accommodate any cabinets which have had the recessed handle option applied.
New Improvements:
- Split width field on pair and straight bifold doors in PDFs
New Fixes:
- Resolved a bug where QFP was sending incorrect drawer face heights to the backend
- Resolved a bug where default edge finishes were not being applied when selecting door styles in QFP
- Fixed confirm button disappearing when editing quantities in the detailed cart
- Fixed confirm button disappearing when editing quantities in the detailed cart
- Updated QFP to utilise explicit overrides for border width on certain products in QFP
New
Software Update - 5.0.0
NEW VERSION!
We're super excited to release a brand new version of Cabinetry.Online, moving from Version 4 to Version 5, featuring the brand new Benchtop Specifier
We're super excited to release a brand new version of Cabinetry.Online, moving from Version 4 to Version 5, featuring the brand new Benchtop Specifier
Improved
Software Update - 4.31.14
New Improvement:
- Make scrollbars more prominent on detailed cart view, cart, and all dropdown lists that are scrollable
- Make scrollbars more prominent on detailed cart view, cart, and all dropdown lists that are scrollable
Improved
Software Update - 4.31.13
New Improvements:
- Backend code cleanups of deprecated features and data
- Added further validations and error messages when a user tries to use a 'Custom Colour' option without filling in the custom colour name field
- Backend code cleanups of deprecated features and data
- Added further validations and error messages when a user tries to use a 'Custom Colour' option without filling in the custom colour name field
New
Improved
Fixed
Software Update - 4.31.12
New Feature:
- Add assembly breakdown in a tab in the job report
- Add assembly breakdown in a tab in the job report
New Improvements:
- Make custom colour field mandatory across all sections (account settings, room defaults, add product screen & QFP)
- Removed the ability for user to utilise scroll wheel on mouse to increase/decrease measurements and other numeric fields
New Fixes:
- Fix incorrect door style saved when clicking "No" on room border changed popups
- Prevent mobile users from getting into QFP using the "Add QFP" link
- Corrected a spelling mistake in the horizontal partition field label
- Fixed an edge case where products that are tagged as Interior Material only were unable to be saved when the customer had a Custom Colour option saved on their room level exterior material
Improved
Fixed
Software Update - 4.31.11
New Improvements:
- Reorganise Room tab layout. Supply Defaults now appear first upon loading the room, with Hardware Selections second instead of first.
- Improved the loading behaviour in the Add Room page. Hardware Selections tab now begins loading immediately, while permitting the user to be able to navigate through other tabs.
- Reorganise Room tab layout. Supply Defaults now appear first upon loading the room, with Hardware Selections second instead of first.
- Improved the loading behaviour in the Add Room page. Hardware Selections tab now begins loading immediately, while permitting the user to be able to navigate through other tabs.
- Add product images to the QFP product dropdown (New QFP, BETA mode only)
New Fixes:
New Fixes:
- Fix door style switching erroneously when there are multiple identical materials (e.g. there are multiple identical materials - one for sharknose and one for flat panel). Make both door styles visible at all times in the material/door search function.
Improved
Fixed
Software Update - 4.31.10
New Improvements:
- Make manufacturer updates box background white on the customer dashboard
- Make manufacturer updates box background white on the customer dashboard
- Add option to set the default material selector for a manufacturer
New Fixes:
- Fix errors when copying l-shape doors in QFP and changing to bifold
- Implemented better handling when loading cabinets whose configured drawer systems had all been hidden by the manufacturer
Improved
Fixed
Software Update - 4.31.9
New Improvements:
- Hide favourites tab in customer settings when add product and sundries aren't available
- Hide favourites tab in customer settings when add product and sundries aren't available
New Fixes:
- Resolved autofill not working on email field on login page in Chrome
- Resolved autofill not working on email field on login page in Chrome
- Removed links from cart view when loading jobs to confirm variations
- Fix customer list crashing when sorting by minimum charge
New
Improved
Fixed
Software Update - 4.31.8
New Feature:
- Added a new auto-scroll feature to focus on the last item added to the job on the detailed cart view.
New Improvements:
- Added a new auto-scroll feature to focus on the last item added to the job on the detailed cart view.
New Improvements:
- Improve email wording when customer account attribution occuring
- Added logic to permit copying sundry text attributes on sundry items added to a users job, when that job is copied.
- Added logic to permit copying sundry text attributes on sundry items added to a users job, when that job is copied.
New Fixes:
- Resolved a glitch where oven and microwave cabinets in a KD Max import was not bringing through drawer top margins
- Resolved a glitch where oven and microwave cabinets in a KD Max import was not bringing through drawer top margins
- Fix detailed cart dashboard text flashing briefly while cancelling out of a product before saving
Improved
Fixed
Software Update - 4.31.7
New Improvements:
- Add job name to all email templates that show the job ID
- Add job name to all email templates that show the job ID
New Fixes:
- Prevent material search tutorial appearing after user closes it, navigates away from material tab, then it reappearing when going back to the material tab again.
- Prevent material search tutorial appearing after user closes it, navigates away from material tab, then it reappearing when going back to the material tab again.
- Resolved "missing parameter hori_height" error on drawer cabinets with advanced door types, which used 'collective face' drawer type, which prevented saving the item to cart.
Improved
Software Update - 4.31.6
New Improvements to material search functionality:
- Initiate search when clicking the search button or pressing enter
- Prevent irrelevant results from appearing after search terms change by cancelling search request when user adds more characters or deletes existing
Improved
Fixed
Software Update - 4.31.5
New Improvements:
- Added pulsing placeholder animations when categories and product images are loading
- Update goFlatpacks cached pricing when job prices being reset
New Fixes:
- Persist correct domain when user is forcibly logged out due to account changes
- Added pulsing placeholder animations when categories and product images are loading
- Update goFlatpacks cached pricing when job prices being reset
New Fixes:
- Persist correct domain when user is forcibly logged out due to account changes
Improved
Fixed
Software Update - 4.31.4
New Improvements:
- Implement backend changes to permit default shelf type to be set on products
New Fixes:
- Resolved a UI display issue on the job report where drawer face sizes were displaying incorrect m2 sizes (didn't affect any pricing calculations)
- Implement backend changes to permit default shelf type to be set on products
New Fixes:
- Resolved a UI display issue on the job report where drawer face sizes were displaying incorrect m2 sizes (didn't affect any pricing calculations)
- Fixed a small glitch on the new Location/Depot functionality where delivery options were being disabled when they're not available on the default depot
Improved
Software Update - 4.31.3
New Improvements:
- Refactor the "quick product" search component used by TDLD and KD Max import to be more robust
- Refactor the "quick product" search component used by TDLD and KD Max import to be more robust
New
Improved
Software Update - 4.31.2
New Feature!
- A new option has been added under Tools > Settings > Manufacturer Defaults to optionally disable variation requests for customers.
This can also be overridden on individual customer accounts (so that manufacturers can permit certain customers to order jobs with variations, but not others)
New Improvement:
- A new option has been added under Tools > Settings > Manufacturer Defaults to optionally disable variation requests for customers.
This can also be overridden on individual customer accounts (so that manufacturers can permit certain customers to order jobs with variations, but not others)
New Improvement:
- Implemented better handling of PDF popups on Safari so that the modal closes when user clicks away on any other part of the screen
New
Improved
Software Update - 4.31.1
New Feature!
- Add depot/branch feature for manufacturers with multiple pickup points or factories. Including specifying Depot/Branch specific pickup or delivery options and fees. New Depot/Branch details added to the Job Report screen.
New Improvements
- Fixed a UI issue where the quantity field on the detailed cart view are shrunken and hard to use on small screens
- Add depot/branch feature for manufacturers with multiple pickup points or factories. Including specifying Depot/Branch specific pickup or delivery options and fees. New Depot/Branch details added to the Job Report screen.
New Improvements
- Fixed a UI issue where the quantity field on the detailed cart view are shrunken and hard to use on small screens
Improved
Software Update - 4.30.1
New Improvements:
- Hyperlink the "Click ... to add one" text on the cart & detailed cart view
- Set numeric fields to their minimum when all numbers are deleted - e.g. on 'Hinge Quantity', if the number is deleted by user, auto reset to '2'
- Hyperlink the "Click ... to add one" text on the cart & detailed cart view
- Set numeric fields to their minimum when all numbers are deleted - e.g. on 'Hinge Quantity', if the number is deleted by user, auto reset to '2'
Improved
Fixed
Software Update - 4.30.0
New Improvements:
- Remove access to the classic UI for customers and all associated code
- Remove access to the classic UI for customers and all associated code
- Added better messaging when a user encounters a 404 page
New Fixes:
- Resolved names of products in cart overflowing when user adds a very long 'Note'
- Fix breadcrumbs in sundries section flashing "base" when clicking the (x) button to clear a breadcrumb
Improved
Fixed
Software Update - 4.29.11
New Improvement:
- Optimise & speed up page loads for QFP and the regular product editor
- Optimise & speed up page loads for QFP and the regular product editor
New Fix:
- Fix PDF button on the cart sidebar not disappearing on Safari
New
Improved
Fixed
Software Update - 4.29.9
New Features:
- Add new option under preferences to disable estimated completion dates on jobs
- Add new option under preferences to disable estimated completion dates on jobs
New Improvements:
- Add "more info" button for shelf type dropdown, and include pictures of different shelf types
- Reimplement customer CSV export by queueing and emailing large exports
New Fixes:
- Fix up and down clickers appearing over dropdowns
- Fix up and down clickers appearing over dropdowns
- Fix pending payment job CSV not downloading
Improved
Fixed
Software Update - 4.29.7
New Improvements:
- Update new registration API to accept registrations from wordpress forminator form
New Fixes:
- Reworked upper filler assembly pricing to remove erroneous additional assembly charges
- Fix formatting of sundry item names
- Update new registration API to accept registrations from wordpress forminator form
New Fixes:
- Reworked upper filler assembly pricing to remove erroneous additional assembly charges
- Fix formatting of sundry item names
- Resolved Xero integration refresh token matter when linked to a Xero 'Demo Organisation'
Improved
Fixed
Software Update - 4.29.6
New Improvements:
- C.O Admin backend changes - non-visible to manufacturers
- Add a prompt to alert users to log out if they try to create a job and it isn't successful.
New Fix:
- Resolved a glitch in dropdown filters on the manufacturer's portal on edge, material and door lists
- C.O Admin backend changes - non-visible to manufacturers
- Add a prompt to alert users to log out if they try to create a job and it isn't successful.
New Fix:
- Resolved a glitch in dropdown filters on the manufacturer's portal on edge, material and door lists
Fixed
Software Update - 4.29.4
New Fixes:
- Implement a patch to prevent products saving with incorrect door styles when room default materials are unavailable
- Fixed some appliances not loading
- Resolved an issue where products which were hidden by manufacturers were visible through the TDLD add product screen
- Implement a patch to prevent products saving with incorrect door styles when room default materials are unavailable
- Fixed some appliances not loading
- Resolved an issue where products which were hidden by manufacturers were visible through the TDLD add product screen
Fixed
Software Update - 4.29.3
New Fix:
- Fix a bug preventing Vinyl products being updated to non-Vinyl products through 'Update room settings'
- Fix errors when trying to add gap or product size sets
- Fix a bug preventing Vinyl products being updated to non-Vinyl products through 'Update room settings'
- Fix errors when trying to add gap or product size sets
New
Improved
Fixed
Software Update - 4.29.2
New Features:
- Added a new "Include door / drawer faces" Yes/No radio buttons on all products that would otherwise have doors / drawer faces. When "No" selected, the system will default to using the 'Non Supply' material on exterior parts, and hide the material search function.
- Added a new "Include door / drawer faces" Yes/No radio buttons on all products that would otherwise have doors / drawer faces. When "No" selected, the system will default to using the 'Non Supply' material on exterior parts, and hide the material search function.
New Improvements:
- Reformat Job Details PDF (table view) to better display information relating to ovens and drawers
New Fixes:
- Resolved a glitch in door previews, where mid-rail positions weren't updating in the preview in certain when altering quantities of rails.
New
Improved
Software Update - 4.29.1
New Fixes:
- Resolved inconsistency in the display of door hang previews when editing saved cabinet products
- Resolved inconsistency in the display of door hang previews when editing saved cabinet products
- Fixed edge matching in QFP (Doors & Panels)
New Improvements:
- Pre-populate pricing for saved QFP (Doors & Panels) items from API to speed up load times
- Add loading spinners to QFP (Doors & Panels) page upon re-editing saved QFP items
New
Improved
Software Update - 4.29.0
New Features:
- Implement material search in QFP/Doors & Panels section
- Added a new prompt when the user clicks the 'copy' button, so they can specify how many duplicates of that product that they want
- Display colour swatches on QFP beside material and edge selection
- Display door style image beside door selection
New Improvements:
- When clicking 'Add Product' on QFP/Doors & Panels, product spec is retained, but height/width and any notes/variations are cleared
- Display colour swatches on QFP beside material and edge selection
- Display door style image beside door selection
New Improvements:
- When clicking 'Add Product' on QFP/Doors & Panels, product spec is retained, but height/width and any notes/variations are cleared
New
Improved
Software Update - 4.28.18
New Fixes:
- Resolved a small UI glitch which duplicated help and support menu items under specific circumstances
- Resolved a small UI glitch which duplicated help and support menu items under specific circumstances
- Updated preview on base pair products to displaying door hang arrow indicators
- Fixed QFP error validation messages displaying incorrect product number
New Improvements:
- On automatically added 'default rooms', apply door style's specific border widths as a default instead of customer set default widths
- On automatically added 'default rooms', apply door style's specific border widths as a default instead of customer set default widths
New
Software Update - 4.28.17
New Feature:
- Added more Xero Integration features, including:
- A Xero Details section, which shows deeplinks to the actual Xero Invoice/Bill, and any balances.
- Added a refresh button, to check for any new payments reconciled against invoices
- Added a button to manually push invoices/bills to Xero
Fixed
Software Update - 4.28.16
New Fixes:
- Resolved recessed handle images not being shown when adding a product.
- Resolved recessed handle images not being shown when adding a product.
- Resolved a bug which caused some cabinets to have the top and bottom section fields text swapped & revert naming of CSV exports to remain in line with this change.
Improved
Fixed
Software Update - 4.28.15
New Fixes:
- Fix face height not updating on microwave cabinets
- Fix erroneous rail position fields when rail amounts are 0
New Improvements:
- Fix face height not updating on microwave cabinets
- Fix erroneous rail position fields when rail amounts are 0
New Improvements:
- Add validation of mid rail amounts
New
Improved
Software Update - 4.28.14
New Feature:
- Add configuration for the direction of door hang arrows
- Add configuration for the direction of door hang arrows
New Improvements:
- Change last job state from "Ready for Dispatch" to "Job Completed"
Improved
Software Update - 4.28.12
New Improvements:
- Rename fields for the Base Door & Drawer product in the product editor and PDF to give greater clarity
- Change wording on production complete emails for pickup jobs to say 'Your job is now ready for pickup'
- Keep manufacturers on the same page when performing job actions (e.g. if job is marked as complete from dashboard, stay on the dashboard or If a job action is performed from the jobReport page, then return to the jobReport page)
- Rename fields for the Base Door & Drawer product in the product editor and PDF to give greater clarity
- Change wording on production complete emails for pickup jobs to say 'Your job is now ready for pickup'
- Keep manufacturers on the same page when performing job actions (e.g. if job is marked as complete from dashboard, stay on the dashboard or If a job action is performed from the jobReport page, then return to the jobReport page)
Fixed
Software Update - 4.28.10
New Fixes:
- Resolved UI bug which was causing cursor to jump around in notes field on the Doors & Panels / QFP screen
- Resolved changes to CSV format with new item codes preventing CSV imports
- Resolved UI bug which was causing cursor to jump around in notes field on the Doors & Panels / QFP screen
- Resolved changes to CSV format with new item codes preventing CSV imports
Improved
Fixed
Software Update - 4.28.8
New Improvements:
- Add IDs and item codes to most Materials, Hardware & Edges tables
New Fixes:
- Add IDs and item codes to most Materials, Hardware & Edges tables
New Fixes:
- Resolved door styles being reset when switching tabs
- Implemented a fix to stop horizontal rail position being reset within QFP upon user changing product size or rail heights
Improved
Software Update - 4.28.7
New Improvements:
- Relax phone number validations to permit more
- Prefill the customer's account listed phone number when creating a new jobs to save time
Improved
Fixed
Software Update - 4.28.5
New Improvements:
- Include the estimated completion date in the "approved customer" email
- Include the estimated completion date in the "approved customer" email
- Add product quantity to yes and edit costs popup
- Implemented UTC time check, and shorter time for token refresh for Xero Access
New Fixes:
- On doors which have a 'locked edge', resolve an edge case bug where the locked edge was being applied to the carcase edges
- On doors which have a 'locked edge', resolve an edge case bug where the locked edge was being applied to the carcase edges
New
Improved
Fixed
Software Update - 4.28.3
New Features:
- Added a percentage feature on vertical partitions (e.g. Broom Cabinets), which change vertical partition position dynamically as a user changes cabinet width. If a 'mm position' is set, then this will be left at the specified amount and won't change as a user updates cabinet size.
New Improvements:
- Remove the word 'Notes' from the variations section heading in QFP / Doors & Panels screen
- Added a percentage feature on vertical partitions (e.g. Broom Cabinets), which change vertical partition position dynamically as a user changes cabinet width. If a 'mm position' is set, then this will be left at the specified amount and won't change as a user updates cabinet size.
New Improvements:
- Remove the word 'Notes' from the variations section heading in QFP / Doors & Panels screen
- Implemented further door validations to account for large negative door margins
New Fixes:
- Fix missing double sided and horizontal grain settings when rooms are automatically created
- Fix missing double sided and horizontal grain settings when rooms are automatically created
- Fix times being displayed as UTC on customer dashboard in the 'Quoted Jobs' section
New
Improved
Fixed
Software Update - 4.28.0
New Features:
- Add new functionality to enable manufacturers to specify a BCC email address, to receive copies of all customer emails being sent (Tools > Settings > Update Details - Customer Email Log)
- Add new functionality to enable manufacturers to specify a BCC email address, to receive copies of all customer emails being sent (Tools > Settings > Update Details - Customer Email Log)
- Add a new accounts-only email fieldfor manufacturers - so that the specified address will ONLY receive invoice and statement related emails. (Tools > Settings > Update Details - Accounts Email)
- Implemented new email templates, with improved styling, content and branding
New Improvements:
- Set a character limit for appliance names
- Improved formatting of "session timed out" message
New Fixes:
- Corrected the alignment of job action buttons on the dashboard, when the 'load more jobs' button is selected
- Corrected the alignment of job action buttons on the dashboard, when the 'load more jobs' button is selected
- Updated the naming conventions of the sundry section banner, to adhere to the manufacturer set name for this option.
New
Improved
Fixed
Software Update - 4.27.4
New Features:
- Additional Xero integration features - invoice branding themes, individual customer payment terms, optionally disable invoice creation.
- Added a keyword search to Prices > Hardware rather than a dropdown list.
Simply enter a keyword such as 'Antaro' and hit enter to filter the hardware to only show results containing this keyword.
New Improvements:
- Only show 'add room' popup once if a job goes through a price reset before being editable
New Fixes:
- Resolved a bug which prevented mass cost edits to be applied to hidden hardware items
- Additional Xero integration features - invoice branding themes, individual customer payment terms, optionally disable invoice creation.
- Added a keyword search to Prices > Hardware rather than a dropdown list.
Simply enter a keyword such as 'Antaro' and hit enter to filter the hardware to only show results containing this keyword.
New Improvements:
- Only show 'add room' popup once if a job goes through a price reset before being editable
New Fixes:
- Resolved a bug which prevented mass cost edits to be applied to hidden hardware items
- Fix new hardware items having to be hidden then unhidden before they're usable
New
Improved
Software Update - 4.27.3
New Features:
- Add option for manufacturers to disable self-registration
- Add option for manufacturers to disable self-registration
New Improvements:
- Use "working days" instead of "days" in leadtime charts
- Use "working days" instead of "days" in leadtime charts
- Consolidation of Xero integration code
- Removed resetting product edging values on QFP when clicking the 'copy' icon
- Removed resetting product edging values on QFP when clicking the 'copy' icon
Improved
Fixed
Software Update - 4.27.2
New Improvements:
- Remove restriction of always having 'Doors & Panels' products come before regular products
- Remove restriction of always having 'Doors & Panels' products come before regular products
- Add job bypass for submitted GFP jobs which had variation costs attached
New Fix:
- Fix manufacturer "set password" links being reported as expired
New
Fixed
Software Update - 4.27.0
New Features:
- Add ability for manufacturers to specify a default and locked edge finishes for each door styles
- Add ability for manufacturers to specify a default and locked edge finishes for each door styles
New Fixes:
- Resolved bug where admin-set default border widths on doors would override a customer-set value on room defaults
- Added applied panels into the outsourced tab of the job report
- Added applied panels into the outsourced tab of the job report
Improved
Fixed
Software Update - 4.26.3
New Improvevements:
- Reimplement TDLD PDF image generation
New Fixes:
New Fixes:
- Resolved a bug where drawer face types in the dropdown options were being reset upon re-editing, despite the saved values being correct.
- Fix edge matching not working applying to first material option in the list on QFP
Improved
Software Update - 4.26.2
New Improvements:
- Improved the Xero disconnection process
- Improved the Xero disconnection process
Improved
Fixed
Software Update - 4.26.1
New Improvements:
- Updated cookie management
- Updated cookie management
- Additional code cleanup and general improvements
New Fixes:
New Fixes:
- Corrected bug which caused the material summary on the materials tab of the advanced job reporting screens to disappear
- Fixed page becoming unresponsive after changing door style (when changing from advanced door style, to non-advanced).
New
Software Update - 4.26.0
New Feature:
- Add support for customers to specifying adjustable legs per-product
- Add support for customers to specifying adjustable legs per-product
Improved
Fixed
Software Update - 4.25.5
New Improvements:
- Update customer listing API data to rename some fields and add delivery addresses
New Fixes
- Fixed a bug which could cause resetting of advanced door settings if the custom colour name was updated on the room level.
- Update customer listing API data to rename some fields and add delivery addresses
New Fixes
- Fixed a bug which could cause resetting of advanced door settings if the custom colour name was updated on the room level.
Fixed
Software Update - 4.25.4
New Fixes:
- Resolved bug with oven heights not always setting drawer face heights
- Fixed a bug where room-level door images were not changing upon selecting a different option
- Resolved bug with oven heights not always setting drawer face heights
- Fixed a bug where room-level door images were not changing upon selecting a different option
Improved
Fixed
Software Update - 4.25.3
New Improvements:
- Updated Xero specific customer CSV export to append the contact name with their email address, to work around restrictions in the Xero import which required unique contact names
- Made the doors search box on materials page show all the time (previously would hide when only 1 door style was available for the product).
- Updated Xero specific customer CSV export to append the contact name with their email address, to work around restrictions in the Xero import which required unique contact names
- Made the doors search box on materials page show all the time (previously would hide when only 1 door style was available for the product).
New Fixes:
- Resolved an issue when mid rail heights/widths were being cleared upon re-editing a product some advanced door products
- Resolved a false error when setting a password to verify a customer account
New
Fixed
Software Update - 4.25.2
New features:
- Allow customer specific coupons to be created
- Initiate a separate minimum usage fee when a customer selects a material to be double sided
New fixes:
- Resolved a bug where KD Max import file uploader was treating invalid files as successful uploads: now an error will display.
- Allow customer specific coupons to be created
- Initiate a separate minimum usage fee when a customer selects a material to be double sided
New fixes:
- Resolved a bug where KD Max import file uploader was treating invalid files as successful uploads: now an error will display.
Fixed
Software Update - 4.25.1
New Fixes:
- Remove Xero ID field from customer self-registration form
- Resolved a bug where updating a room material would duplicate the inner drawers listing on a cabinet that contained inner drawers.
- Remove Xero ID field from customer self-registration form
- Resolved a bug where updating a room material would duplicate the inner drawers listing on a cabinet that contained inner drawers.
New
Software Update - 4.25.0
New features:
- Added support for Xero integration for Manufacturers
- Added roadmap links to 'Help & Support' menu dropdown
- Added support for Xero integration for Manufacturers
- Added roadmap links to 'Help & Support' menu dropdown
Improved
Fixed
Software Update - 4.24.7
New Improvements:
- More cleanups and general code improvements
- More cleanups and general code improvements
- Tighten up validation of coupon codes
New Fixes:
- Resolved the dropdown for drawer selections being overlapped by the footer
- Fix inconsistent CSV upload error messages
Improved
Fixed
Software Update - 4.24.6
New Improvements:
- Fix configuration of split door fridge cabinets
- Fix tutorial not scrolling to show highlighted element
- Only allow customers to verify their accounts until they set a password
New Fixes:
- General code maintenance and clean up
- General code maintenance and clean up
- Hotfix some inefficient queries in Benchtop Designer
Improved
Software Update - 4.24.5
New Improvements:
- Include manufacturer set material height and width overrides in APIs for material search
- Include manufacturer set material height and width overrides in APIs for material search
New
Fixed
Software Update - 4.24.4
New Improvements:
- Added improved validation of partition positions on wine racks products when added in via TDLD
- Added improved validation of partition positions on wine racks products when added in via TDLD
- Added improved validation of shelves for cabinets which have shelves in only part of the cabinet (e.g. robes, wall ovens, base door/drawers etc)
- Make new cabinet products hidden by default
New Fixes:
- Fix edge case where manufacturer contact details were displayed in manufacturer updates section, if no 'News & Updates' had been set
- Fix "toggle opacity" function not working on door previews
Improved
Fixed
Software Update - 4.24.1
New Improvements:
- Add support lattice doors by creating a 'panes' option
- Add support lattice doors by creating a 'panes' option
- Improve login/logout and session resurrection functionality
New Fixes:
- Resolved a UI Fix "collapse menu" button falling off the bottom of the screen
New Fixes:
- Resolved a UI Fix "collapse menu" button falling off the bottom of the screen
New
Improved
Software Update - 4.24.0
New Feature:
- We've added the ability to create & manage coupon codes, and permit your customers to apply them to their jobs
New Improvements:
- Added logic to fall back to room default margins, when a user changes to a finger recess option, and then changes back to 'None'
- We've added the ability to create & manage coupon codes, and permit your customers to apply them to their jobs
New Improvements:
- Added logic to fall back to room default margins, when a user changes to a finger recess option, and then changes back to 'None'
Software Update - 4.23.3
New Feature!
- We've added a new text-based search for rooms, products and customer settings so that customers can easily find their material options
- We've added a new text-based search for rooms, products and customer settings so that customers can easily find their material options
Improved
Fixed
Software Update - 4.23.2
New Improvements:
- Improve display of benchtops in the job report
- Updated styling of PDF button popup in search bar and dashboard to be uniform
- Improve display of benchtops in the job report
- Updated styling of PDF button popup in search bar and dashboard to be uniform
New Fixes:
- Resolved PDF popout options on job being cut off in search on mobile
- Resolved dimensions not displaying in KD Max import for some panels
Software Update - 4.23.1
- Update fallback fonts to be sans serif, rather than serif.
- Major software UI technology version upgrade
New
Improved
Software Update - 4.22.26
New Features:
- Add a Change Room Settings button to the left menu
- Added a short tutorial indicating a Room must be added prior to products
- Job List CSV export for manufacturers (available only when filters applied. Maximum 300 results)
New Improvements:
- Updated message on detailed cart view to be clearer when there's no room added
- Implemented strict validations of file types when receiving uploads
- Add a Change Room Settings button to the left menu
- Added a short tutorial indicating a Room must be added prior to products
- Job List CSV export for manufacturers (available only when filters applied. Maximum 300 results)
New Improvements:
- Updated message on detailed cart view to be clearer when there's no room added
- Implemented strict validations of file types when receiving uploads
New
Fixed
Software Update - 4.22.25
- Updated terms of service
- Fixed graphical glitches when reordering products via drag and drop
- Resolved an out of memory issues when using material mass hiding to hide/show over 3000 materials in one go
- Fixed graphical glitches when reordering products via drag and drop
- Resolved an out of memory issues when using material mass hiding to hide/show over 3000 materials in one go
Fixed
Software Update - 4.22.24
New Fixes:
- Resolved favourite icon not being set on a favourited product, when editing a favourited products which had been saved to the a job.
- Resolved favourite icon not being set on a favourited product, when editing a favourited products which had been saved to the a job.
- Fix missing benchtops on the job report screen
Improved
Fixed
Software Update - 4.22.22
New Improvements:
- Job Top Down Layout PDFs performance improvements.
- Further JobReport pricing breakdown improvements around handling of timber rail costs
New Fixes:
- Fix capital "S" in "UnSubmit" prompt to customers
- Job Top Down Layout PDFs performance improvements.
- Further JobReport pricing breakdown improvements around handling of timber rail costs
New Fixes:
- Fix capital "S" in "UnSubmit" prompt to customers
Improved
Fixed
Software Update - 4.22.19
New Improvements:
- Improved performance of the job report page
- Updated behaviour of minimum usage help icon on job report, so that it doesn't popup upon the mouse hovering over it (click now required)
- Updated formatting of minimum usage breakdown on job report to be uniform across all job report tabs
- Add preview to door drawer products
- Better handle importing products through KD Max import which are missing dimensions
New Fixes:
- Resolved an issue when KD Max import crashed after product added
- Fix toe kick height disappearing on some robe cabinets upon product being saved to job then edited
Improved
Fixed
Software Update - 4.22.17
New Improvements:
- Improved performance of loading the customer reports page
- Improve performance of loading the job reports page
New Fixes:
- Resolved the 'door style unavailable on this product' customer prompt not showing up
- Updated shelf previews on open cabinets to utilise correct colour swatch
- Improved performance of loading the customer reports page
- Improve performance of loading the job reports page
New Fixes:
- Resolved the 'door style unavailable on this product' customer prompt not showing up
- Updated shelf previews on open cabinets to utilise correct colour swatch
Fixed
Software Update - 4.22.15
New Fixes:
- Resolved broken styling on KD Max search popup
- Improved how the detailed cart view displays really tall or wide product images
- Prevented drawer heights being set to "-1" on door/drawer products.
- Fixed drawer runner loading issue when a saved drawer product was edited and the product depth was subsequently updated.
- Resolved broken styling on KD Max search popup
- Improved how the detailed cart view displays really tall or wide product images
- Prevented drawer heights being set to "-1" on door/drawer products.
- Fixed drawer runner loading issue when a saved drawer product was edited and the product depth was subsequently updated.
Improved
Fixed
Software Update - 4.22.14
New Improvements:
- Add beta tag to job report tabs and fix some more bugs
- Updated formatting of taxes on the job report
New Fixes:
- Fixed door height occasionally being cut-off in the panel preview on QFP
- Fix preview image broken on KD Max import
- Add beta tag to job report tabs and fix some more bugs
- Updated formatting of taxes on the job report
New Fixes:
- Fixed door height occasionally being cut-off in the panel preview on QFP
- Fix preview image broken on KD Max import
Improved
Fixed
Software Update - 4.22.13
New Improvements:
- Prevent users from adding base L-shaped drawer products if the Solid Top part is hidden
- Add more detail for minimum usage fees on job report
- Remove the word "business" days from statements
New Fixes:
- Updates to remove discrepancies between the overview graph and jobs on the dashboard
- Fix the assembly default for new users
- Prevent users from adding base L-shaped drawer products if the Solid Top part is hidden
- Add more detail for minimum usage fees on job report
- Remove the word "business" days from statements
New Fixes:
- Updates to remove discrepancies between the overview graph and jobs on the dashboard
- Fix the assembly default for new users
Improved
Fixed
Software Update - 4.22.11
New Improvements:
- Add infrastructure to compile outsourced material details to job report tabs, coming soon to the advanced job report screen.
- Add infrastructure to compile outsourced material details to job report tabs, coming soon to the advanced job report screen.
New Fixes:
- Fix some discrepancies on the reporting graph on the manufacturer dashboard
- Fix branding flashing on login page
- Removed unnecessary "Drawer Panel Edge Inner:" field from CSVs for drawer products
Improved
Fixed
Software Update - 4.22.10
New Improvements:
- On products with doors and drawers (e.g. Wall Ovens cabinets, base door and drawer cabinets), permit different rail details on both the doors and drawers
- On products with doors and drawers (e.g. Wall Ovens cabinets, base door and drawer cabinets), permit different rail details on both the doors and drawers
New Fixes:
- Updated calculations on open units using one material, to better handle varying thicknesses in side panels when bottoms, backs, tops and shelves
- Fix error/success and validation messages appearing under the cart in specific situations
New
Fixed
Software Update - 4.22.9
New Feature:
- Added a new search pop out which gives customers the ability to text search job history for job names, references and descriptions and to quickly access job actions (edit, copy, delete, unsubmit and PDF access).
- Added a new search pop out which gives customers the ability to text search job history for job names, references and descriptions and to quickly access job actions (edit, copy, delete, unsubmit and PDF access).
New Fix:
- Added an error message when user loads a product from the library, and the manufacturer has hidden all permitted drawer runners on that product.
Fixed
Software Update - 4.22.8
New Fix:
- Resolved a matter where approval dates weren't displaying for old jobs
- Resolved a matter where approval dates weren't displaying for old jobs
Improved
Software Update - 4.22.7
New Improvements:
- Updated font on TDLD product search to match rest of the application
- Updated green 'success' messages for QFP actions to match messages in rest of application
- Added a default to always create a room on new jobs if 'add room' button is disabled
- Removed "default room saved" message if 'add room' button is disabled
- Updated the display of multi-part messages from the API
- Updated font on TDLD product search to match rest of the application
- Updated green 'success' messages for QFP actions to match messages in rest of application
- Added a default to always create a room on new jobs if 'add room' button is disabled
- Removed "default room saved" message if 'add room' button is disabled
- Updated the display of multi-part messages from the API
Improved
Fixed
Software Update - 4.22.6
New Improvements:
- Improve experience on jobs with items from disabled features
- Updated colour swatch rotation (when horizontal grain selected) on all areas of the application
Bug Fixes:
- Fix a small bug on sundry keyword searching not working correctly after user clicked through multiple sub-categories
- Improve experience on jobs with items from disabled features
- Updated colour swatch rotation (when horizontal grain selected) on all areas of the application
Bug Fixes:
- Fix a small bug on sundry keyword searching not working correctly after user clicked through multiple sub-categories
Fixed
Software Update - 4.22.4
Bug fixes:
- Fixed the material swatches on the product specification page cabinet image not following the grain direction set on the products material.
- Resolved a preview issue where contrasting edge colours set on room level we're not displaying upon room update.
- Fixed the material swatches on the product specification page cabinet image not following the grain direction set on the products material.
- Resolved a preview issue where contrasting edge colours set on room level we're not displaying upon room update.
Improved
Fixed
Software Update - V4.22.3
New Improvements & Fixes:
- Fix wine rack not reporting top choice on job report
- Fix wine rack not reporting top choice on job report
- Fix invalid completion dates on GFP jobs
- Add "load more" buttons to the outsourced material list
- Updated search logic in Sundries to better handle searches for keywords that don't exist in products
Improved
Fixed
Software Update - V4.22.2
New Improvements:
- Implemented a block to prevent customers being able to use edit buttons before the job is fully loaded
- Fix customers signup source tag being set to 'generic domain' when signing up with a specified manufacturer ID
- Remove the unnecessary 'top shelves' section from wine rack products
- Fixed product validation errors on KD Max import
- Update job report page to use goFlatpacks customer minimum charge in job totals
- Implemented a block to prevent customers being able to use edit buttons before the job is fully loaded
- Fix customers signup source tag being set to 'generic domain' when signing up with a specified manufacturer ID
- Remove the unnecessary 'top shelves' section from wine rack products
- Fixed product validation errors on KD Max import
- Update job report page to use goFlatpacks customer minimum charge in job totals
Improved
Software Update - V4.22.1
New Improvements:
- Add additional reporting in BETA testing on the job report screen
- Updated formula for calculating the maximum drawer length calculations for Ls corner cabinets
- Allow BTD profiles with "."s in their names
- Add additional reporting in BETA testing on the job report screen
- Updated formula for calculating the maximum drawer length calculations for Ls corner cabinets
- Allow BTD profiles with "."s in their names
New
Improved
Fixed
Software Update - V4.22.0
New Improvements:
- Implemented improved password reset email logic
- Removed invalid product popup errors when hardware on specific cabinets was set to drill-only
- Change drawer depth calculation for Ls drawers
- Fix drawer length error message
- Removed redundant GFP code
- Split customer defaults out of customers and manufacturers to facilitate more granular trade/retail control on accounts in Cabinetry.Online
- Implemented improved password reset email logic
- Removed invalid product popup errors when hardware on specific cabinets was set to drill-only
- Change drawer depth calculation for Ls drawers
- Fix drawer length error message
- Removed redundant GFP code
- Split customer defaults out of customers and manufacturers to facilitate more granular trade/retail control on accounts in Cabinetry.Online
New
Improved
Software Update - V4.21.0
NEW FEATURE:
- We've enabled a 'Maximum Job's Price Age' function, which allows manufacturer's to define a set period (in days) for which a user's job's pricing will be valid. This is based on the 'last updated' date on the job. You can find this under Tools > Settings > Preferences
- Once a job has exceeded the number of days in this field, since it was last updated, upon trying to edit the job the user will be prompted with a dialog box that the job pricing must be reset before they can submit or edit.
New Improvements:
- Added a system queue to allow intensive processes to be queued up and ran on a separate server => speeding up loading times for general system usage.
- New 'queued actions' include Job Copying, Benchtop Designer pricing generation, Room Copying and Price Resets.
- Implemented pricing resets on all benchtop elements
- We've enabled a 'Maximum Job's Price Age' function, which allows manufacturer's to define a set period (in days) for which a user's job's pricing will be valid. This is based on the 'last updated' date on the job. You can find this under Tools > Settings > Preferences
- Once a job has exceeded the number of days in this field, since it was last updated, upon trying to edit the job the user will be prompted with a dialog box that the job pricing must be reset before they can submit or edit.
New Improvements:
- Added a system queue to allow intensive processes to be queued up and ran on a separate server => speeding up loading times for general system usage.
- New 'queued actions' include Job Copying, Benchtop Designer pricing generation, Room Copying and Price Resets.
- Implemented pricing resets on all benchtop elements
New
Improved
Fixed
Software Update - V4.20.21
New Feature:
- Added a new feature where, upon a customer updating room materials, all existing product sizes are validated against the new material max length and width. A popup error is now shown where a previously added valid product (e.g. 2900 x 1200 part) then becomes invalid due to user updating room material to a smaller format material (max 2400 x 1200 sheet size). The product will remain using the materials of the valid product and not be updated.
New Improvements:
- Updated the customer list API to not return deleted customers
- Fix redirection to dashboard when refreshing the new UI
- Permit glass cutouts to be managed by the form fields
- Fix spinning loader when admins or manufacturers navigate to a specific page on the new UI
- Added a new feature where, upon a customer updating room materials, all existing product sizes are validated against the new material max length and width. A popup error is now shown where a previously added valid product (e.g. 2900 x 1200 part) then becomes invalid due to user updating room material to a smaller format material (max 2400 x 1200 sheet size). The product will remain using the materials of the valid product and not be updated.
New Improvements:
- Updated the customer list API to not return deleted customers
- Fix redirection to dashboard when refreshing the new UI
- Permit glass cutouts to be managed by the form fields
- Fix spinning loader when admins or manufacturers navigate to a specific page on the new UI
Improved
Fixed
Software Update - V4.20.20
New Improvements:
- Fixed a bug that prevented descriptions on different sundry item variations not refreshing upon changing.
- Added a fix to better report session timeouts
- Fixed a bug that prevented descriptions on different sundry item variations not refreshing upon changing.
- Added a fix to better report session timeouts
New
Improved
Fixed
Software Update - V4.20.19
- Refresh gap and product size caches when they're changed by a customer in their product default settings in their account
- Add full fall-backs to edge matching and optimise it
- Fix customer CSV download only showing customers with jobs
- Add full fall-backs to edge matching and optimise it
- Fix customer CSV download only showing customers with jobs
New
Improved
Fixed
Software Update - V4.20.17
New Improvements:
- Improved adjustable legs trigger updating products within rooms
- Updated edge matching in QFP to find Brand > Colour if no finish exists.
- Added support for locking and setting edges based on door style settings
- Improved adjustable legs trigger updating products within rooms
- Updated edge matching in QFP to find Brand > Colour if no finish exists.
- Added support for locking and setting edges based on door style settings
Improved
Fixed
Software Updates - V4.20.16
New Improvements:
- Use the new UI for 404 handling
- Fix infinite redirects when subdomains in branding haven't been set with all lowercase
- Force subdomains to always be lower case
- Use the new UI for 404 handling
- Fix infinite redirects when subdomains in branding haven't been set with all lowercase
- Force subdomains to always be lower case
Improved
Fixed
Software Update - V4.20.15
New Fixes:
- Resolved an issue that was intermittently not date stamping 'last logged in'
- Updated shelf setback label for robes with bottoms
- Resolved an issue that was intermittently not date stamping 'last logged in'
- Updated shelf setback label for robes with bottoms
New
Improved
Fixed
Software Update - V4.20.14
New Features:
- New setting for Manufacturers! An option has been added under Tools > Settings > Preferences to enable/disable the ability for customers to order advanced door profiles with glass cut-outs
New Improvements:
- Reorganise customer settings page
- Fix management of job database metadata
- New setting for Manufacturers! An option has been added under Tools > Settings > Preferences to enable/disable the ability for customers to order advanced door profiles with glass cut-outs
New Improvements:
- Reorganise customer settings page
- Fix management of job database metadata
New
Improved
Fixed
Software Update - V4.20.13
New Features:
- PDFs now list 'No shelves specified' rather than omitting the shelf section if the user adds a cabinet without shelves.
New Improvements:
- Fix edge settings being lost when quickly saving
- Update of pricing logic open vs open carcase products so they both align if using the same material
- Improved mobile cart view and menu interactions
- PDFs now list 'No shelves specified' rather than omitting the shelf section if the user adds a cabinet without shelves.
New Improvements:
- Fix edge settings being lost when quickly saving
- Update of pricing logic open vs open carcase products so they both align if using the same material
- Improved mobile cart view and menu interactions
New
Improved
Fixed
Software Update - V4.20.11
New Improvements:
- Add functionality to reorder cabinets in the detailed cart view
- Added further cabinet save validation to prevent cabinets face heights being changed and saved with invalid drawer runners
- Fixed missing product descriptions
- Resolved image resizing causing product names to disappear when zoomed out
- Add functionality to reorder cabinets in the detailed cart view
- Added further cabinet save validation to prevent cabinets face heights being changed and saved with invalid drawer runners
- Fixed missing product descriptions
- Resolved image resizing causing product names to disappear when zoomed out
New
Improved
Fixed
Software Update - V4.20.10
New Improvements:
- Added material level 'door filter' restrictions to all products, including those without door styles (e.g open units)
- Force drawer runner fields to validate after cabinet size change, prior to save/update
- All customers now switched to New UI
- Remove line breaks when generating CSVs
- Added material level 'door filter' restrictions to all products, including those without door styles (e.g open units)
- Force drawer runner fields to validate after cabinet size change, prior to save/update
- All customers now switched to New UI
- Remove line breaks when generating CSVs
New
Fixed
Software Updates - V4.20.9
New Improvements:
- Display door image in QFP door style dropdown
- Resolved an obscure error which could appear when clicking edit on a product in the cart before saving a product which was editing in process.
- Display door image in QFP door style dropdown
- Resolved an obscure error which could appear when clicking edit on a product in the cart before saving a product which was editing in process.
Improved
Fixed
Software Updates - V4.20.8
New Improvements:
- QFP support in desktop browser mode on compatible tablet devices
- Improvements to the size of error messages on QFP for smaller screen resolutions
- 'Select supply methods' no longer flashes when switching between tabs on a product level
- QFP support in desktop browser mode on compatible tablet devices
- Improvements to the size of error messages on QFP for smaller screen resolutions
- 'Select supply methods' no longer flashes when switching between tabs on a product level
New
Improved
Fixed
Software Updates - V4.20.5
New Improvements:
- Implement extensive validation on advanced door styles that permit borders to be specified
- Redirect old password reset page to new version
- Add validation for NZ phone number format
- Apply default border widths set on door styles on room level
- Implement extensive validation on advanced door styles that permit borders to be specified
- Redirect old password reset page to new version
- Add validation for NZ phone number format
- Apply default border widths set on door styles on room level
Improved
Fixed
Software Updates - V4.20.4
New Improvements:
- Implemented restrictions to file upload types, sizes and counts in preparation for enabling users to attach files to jobs
- Remove 'door gap' field on products with a single door
- Hide door categories without door styles in the material dropdowns
- Implemented restrictions to file upload types, sizes and counts in preparation for enabling users to attach files to jobs
- Remove 'door gap' field on products with a single door
- Hide door categories without door styles in the material dropdowns
New
Improved
Fixed
Software Updates - V4.20.3
New Improvements:
- Updated more validation messages to ensure clarity to end customer.
- Improve QFP layout on zoomed in or small screens
- Added floating and collapsible left and right menus for small screens
- Updated more validation messages to ensure clarity to end customer.
- Improve QFP layout on zoomed in or small screens
- Added floating and collapsible left and right menus for small screens